Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
So it's literally been two days since I bought the Chaser and-

I made the short trip down to Hiroshima, where 326power is located, so I could pick up a set of brand new Chakuriki coilovers.
Picked up a nice license plate frame for the new plate on the car.


Quite happy with the way the rear sits, but the front needs a little more low and a little camber.

Now I need to get an alignment, and probably new wheels at some point. Also swapping the good bits off the 1J from the 180 so this car can pick up some oopmh.
I like the new fitment! As you said, it just needs to be a little lower in the front. You could get some wider wheels for it, i see there's enough space for them. 🙂
I can let you use my set of CR Kai's or the set of Cerberus II's
Added 40 seconds later:
Just to see what it looks like for a while
It's all good Jdm, I've bought a set of wheels I want to run on this car 😉 They're much wider wheels so it'll be mint.
So speaking of the 180, she lives.


Got the motor in and fired up in three days, and I remember how much I love the gruff tone of an SR20 at idle. Garage Autohero sent me an SR cover all the way from Portland, WA in the US, and they painted it a beautiful pink flake. The SR runs a Tomei M7960 turbo (was a kit for $1250)- get one here
http://www.frsport.com/Tomei-M7960-ARMS-Turbo-Kit-SR20DET-S13-S14-S15_p_17088.html
It's a very streetable setup - the kit included a side mount intercooler but I decided to run custom FMIC piping to an HKS black intercooler. All managed by an Apexi Power FC ECU and Turbosmart boost controller. Going to put it on a dyno sometime soon, but she purrs.
Then later in the day, my Nine Fiasco friends called me up and told me to come to Ebisu to chill. Ryan didn't have his new car yet, but Henry brought his now Ebisu spec S13 to shred. I made the 2 hour trip to Ebisu and paid a small entry fee to just shred. I stuck to the Minami course today, but when Matsuri week is on I'll definitely shred Higashi and Kita. Virtually no people today, given it was a Thursday afternoon and people were at work while I took the day off. There was one guy in a completely stock Eunos going HARD, throwing it in much faster than I'd expect.

And of course, there was Henry..


It was a good day for me to test the JZX, see how she was running for a basically stock 1JZ setup. Was wonderful.




Managed to link most of the course, which is impressive considering this is a 3000+lb car with roughly 276 horsepower when new. Definitely going to go for more power and better tires. Surprisingly didn't burn through a whole set, was able to drive home on these.
Hmm nice, im also thinking of swaping sr20 in my s14 ca18 seem just too weak.
# marcus915 :
So speaking of the 180, she lives.
Got the motor in and fired up in three days, and I remember how much I love the gruff tone of an SR20 at idle. Garage Autohero sent me an SR cover all the way from Portland, WA in the US, and they painted it a beautiful pink flake. The SR runs a Tomei M7960 turbo (was a kit for $1250)- get one here
http://www.frsport.com/Tomei-M7960-ARMS-Turbo-Kit-SR20DET-S13-S14-S15_p_17088.html
It's a very streetable setup - the kit included a side mount intercooler but I decided to run custom FMIC piping to an HKS black intercooler. All managed by an Apexi Power FC ECU and Turbosmart boost controller. Going to put it on a dyno sometime soon, but she purrs.
Then later in the day, my Nine Fiasco friends called me up and told me to come to Ebisu to chill. Ryan didn't have his new car yet, but Henry brought his now Ebisu spec S13 to shred. I made the 2 hour trip to Ebisu and paid a small entry fee to just shred. I stuck to the Minami course today, but when Matsuri week is on I'll definitely shred Higashi and Kita. Virtually no people today, given it was a Thursday afternoon and people were at work while I took the day off. There was one guy in a completely stock Eunos going HARD, throwing it in much faster than I'd expect.
And of course, there was Henry..
It was a good day for me to test the JZX, see how she was running for a basically stock 1JZ setup. Was wonderful.
Managed to link most of the course, which is impressive considering this is a 3000+lb car with roughly 276 horsepower when new. Definitely going to go for more power and better tires. Surprisingly didn't burn through a whole set, was able to drive home on these.
nice build and beutifull engine iΒ΄m think the chaser gonna look mint.
# klucifers :
Hmm nice, im also thinking of swaping sr20 in my s14 ca18 seem just too weak.
Personally I'd swap, there's more aftermarket support for an SR over a CA.
Man, I'm loving what you're doing with these cars. Keep it up!
Seeing your thread makes me super hyped to get the AE86 where I want it and then sideways.
Nice work with the swap for the 180! And you definitely need more power for your Chaser if it's so heavy.
erm, then where is the place to ask about the 240/180/200sx mod?
If you're SEARCHING for a mod, then it has to be the CAR/PART SEARCH thread, right? How did you not see it? And just one more thing: don't forget to check out the download section here. 😉
# marcus915 :
Goddamn i love 4 door Toyotas. Also, it's crazy to think that those are the same rims and in the same size as the ones i ran on my Beemer.
Right? Hahah I didn't think they'd look good too. Four door Toyotas are just ugh.
Lagano I am swapping most of the aftermarket parts on the 180SX 1J over (Trust turbo, manifold, throttle body, intake manifold, cams, etc) so it'll be lit.
But first..test fit B)

Much wider than the BMW wheels..

Not quite a common choice for JZX's either. but 17x9.5 OZ Futuras with a 0 offset. Gonna need to run a little more camber or do some fender work to make em fit.