Forum
Questions, builds, help and the odd argument. The mods and guides are out front.

Daaaamn. Photos looks fire.
P.S your Z drives pretty well ( ͡° ͜ʖ ͡°)
no doubt that cressida is in the good hands 😉
also that trip looks fun, might going to Daikoku PA sometime. Always been interested with the meet held in that place....
(also lovin how this RP is written up, keep up the good work)
all your pics are mint
This is actually a good RP.
Keep it up.
-✘ Well.. Hello everyone, anyone missed me ? haha. Long story short I was very busy working,travelling and doing random shit if being honest. So yeah, this will be a short update because I will post everything in detail later today. As you may already know I am trying to sell my lovely Z' because I have chance to buy another car which I always wanted and I don't want to waste such opportunity.. But if things doesn't go as planned, I will keep my Z' and will modify it even more.. Here is the ad.
Vehicle name: Nissan Fairlady Z ( 350Z HR )
Year: 2007
Miles: 67.xxx KM's
Engine: VQ35HR
Transmission: 6 Speed Manual
Color (interior/exterior): Wrapped in Purple ( original color is silver ) Both colors are scratch free. Interior is Black leather.
Condition: Always taken care of, looks, runs and drives good as new.
List of options/add-ons: | NISMO Bodykit | Brembo Brakes & StopTech Pads/Rotors | CCW Classics | TEIN SUPER RACING COILOVERS | EXEDY STAGE 1 CLUTCH | EXEDY RACING FLYWHEEL | AEM Cold Air Intakes | ECU REMAP ( made consistent 290WHP on dyno ) | Suspension is set perfectly | And probably other few small bits.. |
Price: 24000V$ As it is now, 17000V$ Without CCW Wheels and Tein Suspension ( will put her on steelies and stock suspension ) of course we can negotiate.
Location of vehicle: Japan, OSAKA / Bay Area. Can arrange free shipping to Russia or anywhere in the world for +-1000V$.
Pictures:



Email me for more information.
-✘ A lot of things happened last month, so I will do complete write up later today.
BIG UPDATE
( photo heavy post )
-✘ WelL.... Hello everyone, it's been more than three months since I posted something here.. Oops, I was absent, very busy you know.. ¯_(ツ)_/¯
Also I said that I will do write ups and updates when I have free time but never did.. So now we will overview those three months as alooot of things happened and changed.
MAY
-✘ Well.. Here we go boys, first things first. I think it is obvious what I did first when I came back from Tokyo ? Of course I took my Z' for a "spin", it was so good to be able to drive my car again you know. So I filled my gas tank up, called Oscar ( Terroras ) , he took his mighty Silvia and we hit the road, as usual we found ourselves in the middle of nowhere in outskirts of Osaka lol.. Empty quiet abandoned roads without anything lively in sight, just two hooligans "flying" down the narrow roads. Did more than a 200km's that night driving up and down the hills, until my gas light appeared, so we decided to call it a night and return back to our garage.


-✘ The next day I didn't wasted any time and immediately started working on my cars again, so the alignment of Z' suspension followed. With the help of Shao we set everything up perfectly, just the way I wanted. Adjusted camber, caster, damping, height and etc.. The responsiveness and handling of the car increased drastically. Couldn't be happier! Function over form you know. Looking good as hell even without crazy cambers and stuff <3



-✘ So now lets talk about my Cressida.. It was not forgotten too ! ( spoiler alert - ˢʰᵉ ᶦˢ ᵃᶫʳᵉᵃᵈʸ ʳᵘᶰᶰᶦᶰᵍ ᵃˢ ᴵ ᵃᵐ ʷʳᶦᵗᶦᶰᵍ ᵗʰᶦˢ ) So yeah, the next day after I "finished" with my Z' I started with disassembling. Of course with the help of few friends, we managed to strip her in few hours.

-✘ First we took the 18R engine out of her, as it will go to the scrapyard, because it was beyond repairable condition, holes in block, and I already had better plan in mind for replacement.


-✘ Next thing we did we took all fenders n shit off, so in the end it was just a body on wheels.



-✘ Remember when I said I had better idea to replace the engine ? Well here it is, I bought a 1999 Toyota Altezza RS200 with 5th generation 3S-GE Beams engine with manual gearbox as a donor car to my Cressida as I needed engine, independent rear suspension and other suspension bits, so we decided to take everything from Altezza because it is Toyota too and the dimensions of wheelbase was not that much of a difference. I bought it kinda cheap, the car was running and in driving condition, we did some "test" runs wit her too, nothing surprising, but we got what we paid for, but thats not a problem as we will be rebuilding everything. The hardest thing is definitely the suspension swap, but with "some" welding and fabricating shit it will be put in place in no time.


-✘ May 14th I left to Tokyo again and left my Cressida in Shao and his crew hands, so no worries, the work was still in progress all the time. This time I took my Z', It was probably the longest trip my car had seen with me behind the wheel. I was going to visit our Russian friends once again, as they found the "goods" I asked them last time, so I took another few days off and spent them in Tokyo doing random shit again. I stayed at their home and did some work with them, also the reason I came here at first place is to replace my OEM brakes with Brembos, install AEM Cold Air Intakes and Remap my ECU for some power gains, also I needed to bring some parts home. Aand about Brembo calipers, they sourced and rebuild them for me, also painted them red, of course it was not for free as I need few other parts as Discs and pads. So now the car had better stopping power and a lot less fade, once again success.
-✘ As you may noticed they are already working on another E46 they shipped here from Russia.. Yeah the same thing as the last white one, same V10 swap and etc, it seems like that cars are in demand here in Japan haha, nothing surprising.



-✘ After AEM intakes install and ECU remap the car was doing solid 290WHP on dyno, another successful thing installed on my car. Also they invited me to go to Tsukuba Circuit with them, as they and other companies they are working with was having a private track day to test their project cars, but anyone who paid a considerable sum of money was able to drive here too. I was lucky enough to go there for free as I my Z' was listed as one of their project cars. Luckily I always have my racing helmet in my car, so I only needed to borrow other bits of clothing that was needed, but that was not a problem. Pic of my Z' on the way to racetrack.

-✘ Waiting in the pits after inspection, my car got marked with 88 number.

-✘ I am not saying it was my first track day in my life as I have been to few in my old BMW's back in my country, but Tsukuba was definitely the best one so far, I have never been on such amazing and quality track, both thumbs up from me, it was as good as watching Japanese racing "gods" driving on that track haha. Of course I "destroyed" my tires, but that was not a problem as there was Nitto Representatives that day and I was able to get another set of NT05R tires. After some laps I was kinda familiar with the track, you know.. the Gran Turismo days made it easier haha. After some time I was passing and overtaking other similar performance cars, the Z' performed better than I expected. By pushing myself and my car to the limits I managed to lap the track at 1 minute and 5'** seconds which is very impressive I must say. Some photos of me from the track day the photographer emailed me.
-✘ Attacking the apex and "flying" in the straight away. Also loving the picture from the Pit area.



-✘ So yeah, it was time to go home, couldn't be happier about the work guys did to my Z' and the results from Tsukuba. So now back to work.. If anyone is wondering how does the Altezza looks like, here she is, sitting in the corner of shops backyard, all stripped and stuff, will be sold to scrapyard for the price of metal, oops. Who needs it anyway.. Guys already sold the parts that are in demand, so no harm will be done.


-✘ So basically in May, we did a lot of things, upgraded my Z' even more, but most importantly we adapted Altezza's suspension in Cressida, we cut out the rusted places and welded in our fabricated bits to minimize rust, also installed the TEIN FLEX coilovers which I brought from Tokyo, customized control arms for big steering lock, and other bits too, basically prepared the for engine installation, but thats for later, as I will talk about engine in June overview..


-✘ Here is the last photos of my Z' that I took in May before trying to sell her, to end this post, I will do complete budget overview after I will be done with all those monthly updates, because I need to count how much I spent and received, oh most enjoyable thing - Bookkeeping haha. June and July review will probably be posted tomorrow the same time as this one.


-✘ So yep, I will post everything else tomorrow, as today I am already tired n shit, a lot of good things happened so keep an eye open guys. Peace.
Isn't that quite the waste of a chassis?
Anyway, looks good.
Look great.
I see you were quite busy for the last 3 months! 😃
Are you making that Cressida a drift car? You might be short on power with a 3S-GE! Well we swapped one in an AE86 a while ago but it's lighter so it doesn't need so much power. Anyway, keep up the nice progress with your Cressida. 🙂
# Lagano :
I see you were quite busy for the last 3 months! 😃Are you making that Cressida a drift car? You might be short on power with a 3S-GE! Well we swapped one in an AE86 a while ago but it's lighter so it doesn't need so much power. Anyway, keep up the nice progress with your Cressida. 🙂
And it is only review of May haha..
Yeah, it is being built with purpose of being a "drift" car, nothing crazy, just for my own pleasure driving it, won't participate anywhere. I think there will be enough power as the engine won't be stock, also the Cressida will be going "under the knife" to drop some weight you know, hoping to get her around the 1000kg mark. 😉
Nice progress so far. :cheers:
Those are really BIG updates! A big leap to the progress
FOLLOW UP
Many photos once again.. TOP KEK
-✘ Well, here is the promised follow up of those three months. ✘-
JUNE
-✘ At the beginning of the June we started working on the engine, because we already had all the parts we needed.. Oh well.. Another month full of headaches and sleepless nights at garage.. First things first right? Before dropping engine in we carefully measured everything up, basically prepared the engine bay for new engine. But before all that, custom made engine mounts was made by Shao, so all we needed is to find best spots to weld them in, did everything at ease in two days, measurements, engine in and out few times and etc. Made sure there will be enough space between our strut bar and engine. Here is the photo of final position of the engine inside before taking it out again for rebuild.. ✘-


-✘ You obviously noticed that roll cage too, it was put inside for measurement purposes only because there was many other things to do before that as we decided to completely strip the interior out, and paint it in one solid color, also we saved a lot of weight that way. But thats for later. ✘-

-✘ You may think that all I did was working on the Cressida, but hell no.. After that Tsukuba track day I started looking at my Z' from other perspective, I needed something more, it just weren't that good anymore, I wanted to go faster, but because I had other things going on in my life such as Cressida,family and other that type of things, I turned away from going forced induction by all means necessary.. Needed money in other places. But after doing some research I decided to bite the bullet and go for cheaper alternative, which is not so common I guess.. I got myself a ZEX™ Nitrous System Kit.. Also bought Seibon canards and Seibon Carbon Fiber rear spoiler for more downforce as losing traction was one of my main problems at the track. But let's get back to Nitrous. We installed it, it was pretty easy job, adjusted the jets for 100hp shots, it was maximum, we couldn't go any further without hurting the engine pretty bad, because 100hp a shot for VQ35HR is considered fookin alot, everyone stays at 70'ish, but I decided to do some risky shit as always.. Pics from the day we installed everything on my Z'. ✘-



-✘ Of course I took her for a ride, the kick of nitrous definitely is here, pulls a lot stronger while spraying from 4000' rpm till the limiter, something to keep me satisfied for a while, because as you know NOS runs out.. ¯_(✘)_/¯ I can't lie, I like that "new" look of the car, that spoiler and those canards, instantly a lot more aggressive looking Z'. But that was not enough again, the feeling of flatline started bothering me as I didn't did anything to that car in few months, almost no progress what so ever.. Just wasting money and trying new shit, nitrous ftw.. So I started looking for something more once again. The one thing that got my attention was Mercury Z GT3 Full Aero Body Kit, but that shit cost like 5 or 6 grand.. Then I got back to reality, I realized I was wasting money on the Z' for no valid reason at all, despite the fact I was about to move in my own new apartment with my significant other, I also had another project car, and Z' was becoming fucking full blown thirty grand race car without zero practicality in my daily life, so thats when the first thoughts of selling her started haunting my mind, I had other priorities, I was just starting my own family life, so no matter how much I loved that car I needed to do something. So few days later I posted her for sale, but no luck whatsoever, no one appreciate the work put in her, she was still mine. ✘-

-✘ Once again I decided to take some free days from my work, as it was becoming routine - work, work on Cressida and home, nothing new. So I went to Tokyo for weekend to spice things up and relax once again, of course I took my Z' as it was my one and only somewhat daily driveable car.. As always I stayed at the Russian guys place, so no expenses there. Just before I was about to leave the Tokyo, on my way to the car I got call from one of the Russian guys that big meet in Daikoku Futo was about to go down.. Despite the fact it was midnight, I hopped in my Z' and in no time I was on my way to Daikoku.. Same long,wide and almost empty road where we took GTR's for a spin and I am in my Nissan.. I believe there is no need for explanation what happened. Perfect time to test my 350z, risking once again. Managed to squeeze 290+- KM/H of her while spraying nitrous the whole time, she was literally screaming. That ECU remap was one hell of a job as they also removed speed limiter and basically derestricted her. When I reached the Daikoku I parked near "bombed" out 458 Italia with Liberty Walk Kit, turned out it was some kind of Japanese business man, no names was mentioned. ✘-

-✘ Of course as usually police started cracking us down, so most of us got in our cars and hopped onto expressway to drive together.. Everything was going calmly, no one showing of or something, probably most civilized group ride I have been, until out of nowhere we all got passed by blue Subaru WRX followed by EVO X, both cars were going more than 240KM/H for sure, as we were keeping steady pace at 150'ish.. Of course the ones with faster cars decided it was good idea to step it up, and try to catch them up.. But me and few others decided it would be best to not get involved.. But, someone decided it would be good to tailgate and flash me, which appeared to be a 2014 Nissan 370z Nismo, it was obvious what he wanted. So I moved to the right lane, and prepared for the rolling pull from 100KM/H, guess what happened next, all three times we stepped it up I walked him each time and he couldn't keep up with me, of course nitrous and #drivermod helped me a lot, my Z' proven to be quite a challenge for other cars too, which I couldn't be happier for. After all those shenanigans that 370z passed me, signaling me to follow him. The sun was already rising as it was nearly 4 AM in the morning.. So we ended up in empty parking lot. ✘-



-✘ He introduced himself, we talked for a bit, turns out he tunes Z' Nissans.. Judging from his car, what a surprise huh ✘ We talked for almost two hours, I mentioned that my Z' is for sale, and he told me that he might know someone who would be interested in buying my car, he sent him my ad link, and despite the fact it was like 6 AM in the morning he gets reply in no time- "get him to the shop, we got a lot of paperwork to do today". I was like okay, lets see what this is all about. We arrived at some kind of warehouse where we met the man from text messages, once again it turns out that I am dealing with a businessman who runs some kind of clothing company, and the craziest thing is that he is about to buy my car. He starts walking around my Z', sits in it, turns the engine on, I can tell that he likes my car a lot, and the fact that this lil 350z just punished real 370z Nismo excites him even more. After that "inspection" he gets out and says "I'm buying it." And I am standing there lost in my mind,thinking if I should really sell her.. But as I said, I have other priorities now, so sorry Z', it was one hell of a run with you. And without thinking twice,I agree to sell her, he didn't even negotiate, I guess the money is not a problem for him. We sign all the paperwork, but the best part is that he pays me in cash.. So here I am, on a train, going home to Osaka with more than 3 million yen (30,000V$) in my backpack.. ✘-

JULY
-✘ So yeah, new month, new things right ? Sold Z', moved into new apartment, started earning more money as everything was going fine, what more could I ask for. The only thing I needed now was a good, practical and reliable daily car, so I started looking for something "new". After considering my possibilities and budget I decided to look for something more family oriented and luxurious, BMW's preferably as I love those cars. So after browsing the craiglists and internet for few days, I stumbled upon tempting car.. Straight to the point now, It was Black 2011 BMW F10 550i AT with M-SPORT PACKAGE which had 60,000 kilometers on clock, basically well maintained and loved by the previous owner, was being sold because owner replaced that F10 with new 7'series. So I called Oscar ( Terroras on forums ) and we went to see it. After inspecting it and taking her for a ride around the block I was surprised how well it handled and how soft and comfortable the ride was compared to the E60 as I had driven E60 530d before. So after considering for a bit, I decided to buy it, I din't even negotiated as the car was in perfect condtion, and bought her for 24.800V$, finally a "practical" gas guzzling "family" car in my garage, four doors tho haha, and it had a Twin Turbo V8 with 400 horses under the hood, so it was a win win situation, definitely would give most JDM cars a run for their money. ✘-


-✘ Here is some pictures of my F10.. I was satisfied with my new purchase, we will see how well it is going to be in the long run, will keep her for quite some time now. But you know.. As the saying goes - every 550i wishes it was an M5 and every 550i driver wishes about driving the M5, so future will show what will happen next.. ✘-


Spoiler: BMW F10 550i
Production year - 2011
Color - Jet Black
Engine - N63B44O0 / Twin Turbo V8 / 402 bhp / 443 lb·ft /
Transmission - AT ZF 8HP
Suspension - ///M Sports
Exterior - ///M aerodynamics package
Wheels - BMW Wheel Style 312 - 20" cross-spoke, ferric gray finish
Interior - Sport seats | ///M Steering wheel | ///M Gear Knob | ///M Footrest | BMW Individual roof lining | M aluminium hexagon interior trim strips |
-✘ So.. The July was ending, and we made a lot of progress that month too. The Cressida's engine was fully built and inside the car, wiring was already done, only the interior left.. One thing I must tell you guys, we took the hard route and bought and built everything ourselves which in result we had a fully built 3S-GE Racing Engine which loves to rev up to 9K RPM if not more.. And the cost of all that, oh boy, it would be cheaper to put 2JZ inside and call it a day.. Because after we finished with our engine, we saw few Racing Spec 3S-GTE Engines for almost the same price we spent on our engine, but we learned a lot by doing everything ourselves, whats the fun of buying someones else built engine ? With more than six grand under the hood it was one hell of an engine, also our build will be good for around 800whp if decide to go forced induction one day, I won't tell anything more as I don't want to spoil everything for you guys, wait till I reveal her later. One thing to tell, it cost me more than 11 grand to build my Cressida. ✘-
-✘ Well, we stripped the interior out, painted it all black, welded the rollcage in, a lot of parts came from UpGarage, such as seats, gauges, handbrakes, steering wheel and other similar things, so we saved a lot of money by buying second hand parts. Will do full price list of her parts upon reveal. Here is some progress pics of the installation. Pictures will do the talking. ✘-




-✘ After all the interior work was done, I started the assembly of the Cressida's body, you may ask about the windows of her as you know that only front windshield was still in place, every other one was shattered.. So basically we were missing five windows, of course we didn't find none to buy, so we went the other route, fabricated them from Lexan Glass, which is basically a strong transparent plastic used in motorsport for such purposes, also we saved weight once again. Then the test drives began, we tuned her, adjusted everything, it was a long process of getting everything right, but we succeeded, the Cressida was finally driveable, and the 3S-GE performed better than we expected, won't reveal the numbers we pushed out of it, will do it upon reveal, but I must say you will be surprised. Then the preparation for paint and final assembly began. Here is the pics from the spray booth. Sitting primered n shit. ✘-


AUGUST
-✘ So yeah, present month, August. Won't talk about it much, as all I did was finishing the Cressida, working and being occupied by my social life. But here is the "little" sneak peak of Cressida to get the idea on what to expect on reveal. Probably will reveal her tomorrow, as I still have something to do, you know, being extra as fuck, once again making you wait, sorry guys ¯_(ツ)_/¯ ✘-

-✘ Well, that was it, a lot of progress was made in those three and half months, now it is time to relax a bit haha, a little less things to worry about now. So yeah guys, keep an eye open for reveal tomorrow, peace :thumbsup: ✘-
Spoiler: EXPENDITURE
At the beginning of the May = 1910V$
Paycheck - +9825V$
BREMBO BRAKES / AEM INTAKES - -1550V$
ZEX™ Nitrous System Kit - -650V$
SEIBON Spoiler and Canards - -800V$
Cressida Parts Altezza included - -10.929V$
Other expenses - -1000V$
Sold the 350Z - +30.000V$
Bought the F10 - -24.800V$
LEFT = 2006V$
Can't wait to shred some tyres together.