VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ AJ's Realistical...
 
Notifications
Clear all

V$ AJ's Realistically Unrealistic RP Builds [WARNING: BAD CONTENT]

585 Posts
41 Users
0 Reactions
468.6 K Views
Wypple
(@wypple_30522)
Trusted Member
Joined: 9 years ago
Posts: 81
 

I think it's time to get crazy with that CRX.



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

# ErwinFenyvesi23 :
pressing F intensifies Man that sucks ! If you think about swapping another engine in , you could go K20 or just do some mad shit and swap an F22 in there 😃

Thanks for the F mah dude.

# saletl :

F

That is a shame man. ... rebuild the engine. imo

Yes indeed man.

# Dr. Zoom :
Keep CRX and swap to K20.

# MACKAY :
Don't be stupid, don't sell your car, I am sure you would regret it later man. Swap the engine to built B16 and you will be good for sure. :morncoffee:

# skip :
Nooooo, don't sell it, rebuild! Things too nice to sell.

# radcoon :
noooooooo! don't sell this beauty! Maybe get a cheap daily and work on it besides. it is such a great car!

# Soju :
I would not sell this beauty as well

# melt :
Oh man, how bad is it?

Crankshaft and connecting rods are peeking through the block, so... dead engine.

# Wypple :
I think it's time to get crazy with that CRX.

Thanks for the love guys, appreciate it.

It's been a month since the B16A SiR-V blew on C-REX. Been having a hard time walking and biking to work as well. So I finally bought myself a daily, which also happens to be a beater. A daily beater.

1996 Honda Civic LX (EK8). Pretty weathered and dusty, but it's alright. Shaken is good for 8 months but I didn't get the plates until a week after I got the car, as you will see later on. Selling price I bought it for was 220,000 yen (V$2200).

Under the hood? A MONSTROUS D16Y7 mated to a 5 speed manual to produce an INSANE 106hp and 103lb-ft.

A week after driving and getting a feel for it, I decided to work on it a little. The 193,897 km ODO reading wasn't really noticeable as after I changed the oil, changed the gaskets and plugs and reconditioned the other components, the engine ran strong and smooth. Also worked on the suspension to replace the suspension bushings because I was gonna replace the same parts on C-REX as well. Total cost of parts on this EK8 was V$400.

A week after that, when the car was mechanically ship-shape, I gave it a full detail, outside and inside. This is what it looks like now.

I've decided to name her Kate. The lovely (E)(K)(8) :-X 🙂)

Mandatory McDonald's initiation trip of course.

Now that the daily is out of the way, let me discuss the progress on C-REX.

Engine is out, and has been sold for a price of $900. To be picked up a few days from now. New parts have also arrived. Spoon DC2 BBK and 5 lug hub swap, 160,000 yen (V$1600), Energy Suspension Bushing Kit V$305, EK9 CTR Wheels 69,500 yen (V$695).

Pic during BBK and bushing kit installation:

After:

I think it actually looks pretty good haha. What do you guys think? Anyways, next step is the engine, to follow. Thanks for staying tuned!

Finances wrote

V$22,880 + V$565x4 + V$900 - V$2200 - V$400 - V$1600 - V$305 - V$695 = V$20,840



   
ReplyQuote
Dr_Zoom
(@dr_zoom_29425)
Member
Joined: 9 years ago
Posts: 1110
 

Nice civic! Glad you kept C-REX. :thumbsup:



   
ReplyQuote
Wypple
(@wypple_30522)
Trusted Member
Joined: 9 years ago
Posts: 81
 

That CRX will never die! (almost 🙂 )



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

# Dr. Zoom :
Nice civic! Glad you kept C-REX. :thumbsup:

Thank you! Something tells me I made the right choice.

# Wypple :
That CRX will never die! (almost 🙂 )

C-REX WILL CARRY ON!

Added 55 minutes later:

REVIVAL!!!



It's been a while guys! Been busy but here's some progress for you to enjoy.

Finally saved some money up to order a full built Spoon B18C from a DC2 Integra Type-R. This time, I chose not to boost it, I'm keeping it as a powerful, reliable, responsive VTEC motor. But of course, this has the Works done to it. Spoon Sports Complete DC2R B18C. Stock displacement of 1797cc, but upgraded internals. Block is forged. Balanced Pistons, Balanced Crankshaft, Balanced Connecting Rods. 81.0mm Bore, 87.2mm Stroke, 11.4:1 Compression. ARP Main Stud Kit, ARP VTEC Head Stud Kit, ARP Rod Bolt Kit, ARP Harmonic Damper Bolt Kit. Ported and Polished Head and Intake Manifold. J's Racing Headers. Spoon Sports Racing Balanced High .256 Intake Camshaft, Spoon Sports Racing Balanced High .245 Exhaust Camshaft. Spoon Sports Adjustable Intake and Exhaust Cam Gears. TODA Timing Belt. ARP Spark Plug Cover. NGK BKR6EIX Iridium Spark Plugs, 0.44mm Gap. Spoon Sports High Tension Plug Cord Power Cables. Spoon Sports Metal Head Gasket. Walbro 255LPH Fuel Pump. AEM Fuel Rail. 550cc High Impedance Top Feed Fuel Injectors. ARP Pressure Plate (Clutch Cover) Bolt Kit. ARP Flywheel Bolt Kit. Exedy Racing Stage 3 Hyper Single Plate Clutch Kit. Spoon Sports Chromoly Lightweight Flywheel. YAP. Money's gone lol, down the drain. Cost for the whole build was double the price of the car. 313,000 yen (V$3,130)! Let's hope it makes 313hp lol.

Now that the technicalities are done with. Cue progress pics!


Thank God for Al's engine hoist!


Nothing new for the rear end, still looks cool though haha

Had take the battery off first due to clearance issues. But after that it was all smooth sailing.


Aaaaand it's in!


Fitment is pretty snug in there I know. Oh yeah, also installed an ARP Wheel Stud Kit. V$25 shipped.

Wired everything up to the Hondata S300 Fully Programmable ECU. Topped up with 4L of the Spoon recommended Motul 300V Fully Synthetic Oil (18,000 yen (V$180) total, 4,500 yen (V$45) per liter). Turned the key. BRAP BRAP BRAP BRAP BRAP. It was really loud since I haven't gotten the flex pipe fabricated to fit the headers to the exhaust yet. But MAAAAN it sounded mad and raspy.


All tucked in and ready to get put back together.

Thanks for staying tuned! Assembly process coming soon!

Finances wrote

V$20,840 - V$3,130 - V$25 - V$180 + (V$655 x 3 weeks paycheck) = V$19,470



   
ReplyQuote
Dr_Zoom
(@dr_zoom_29425)
Member
Joined: 9 years ago
Posts: 1110
 

Move battery to rear somewhere C-REX?



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

# Dr. Zoom :
Move battery to rear somewhere C-REX?

I might just do that



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

C-resurREXion!


Spent these past 3 almost 4 weeks finishing C-REX, wiring, bringing the front end back together, A/C system recharging blah blah. I'm just so happy it's running. And BOIIIII is it fun! I missed it so muchh! This car really is a breathe of fresh air after having to make do with an econobox sedan for my everyday commute.

First McDonald's trip in almost a year!

Come 2 weeks after, when the engine had been broken-in and the final road tune had been set, I finally took the car out for its first proper touge run! YASSSSS :bananajump:

Pre-run checks. Oil, coolant, ignition, AFR, spark, the usual.

Hmmm where's the battery? It's just right in here.

Departure:

MAAAAAAANNN this little pocket rocket feels so much better now! N/A is literally the perfect choice for C-REX, more so a high-revving built B18C!

Retuned the shocks to match the road conditions, the car has never performed this well, also thanks to those Spoon brakes and new Energy bushings.

Now that the mods are done and the car is running at its peak, time for dyno! (OORP: Does anyone out there know of any good maps that have a dyno? TIA!) IT'S TIME FOR MORE MODS YO! HUE.

Finances wrote

V$19,470 + (V$655 x 3 weeks paycheck) = V$21,435



   
ReplyQuote
ErwinFenyvesi23
(@erwinfenyvesi23_28263)
Honorable Member
Joined: 9 years ago
Posts: 717
 

Man thats sick ! Gotta love the B18 swap !



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

# ErwinFenyvesi23 :
Man thats sick ! Gotta love the B18 swap !

Thanks man! Spoon-built B18C is feeling good, car feels new!



   
ReplyQuote
Dr_Zoom
(@dr_zoom_29425)
Member
Joined: 9 years ago
Posts: 1110
 

Damn CREX being busting alived! You could add better seats(because you adding more powerful engine,factory seat let you slipping your ass over place), maybe add some gauges?



   
ReplyQuote
MACKAY
(@mackay_25093)
Honorable Member
Joined: 10 years ago
Posts: 701
 

Ahh, I'm glad you went back to the roots with NA engine, you made even better choice and went with B18 instead of B16, civic looks better than ever, even tho I miss your old wheels. :thumbsup:



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

# Dr. Zoom :
Damn CREX being busting alived! You could add better seats(because you adding more powerful engine,factory seat let you slipping your ass over place), maybe add some gauges?

Thanks man! More mods are coming soon, including seats and gauges! Stay tuned!

# MACKAY :
Ahh, I'm glad you went back to the roots with NA engine, you made even better choice and went with B18 instead of B16, civic looks better than ever, even tho I miss your old wheels. :thumbsup:

Thank you! Don't worry, I'll be slapping some new wheels on when my order arrives!



   
ReplyQuote
StratoWolf
(@stratowolf_23870)
Prominent Member
Joined: 10 years ago
Posts: 747
 

That's a beefy CR-X.



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
Topic starter  

# StratoWolf :
That's a beefy CR-X.

I'll take that as a compliment haha, thanks!



   
ReplyQuote
Page 6 / 39
Share: