VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

Shop: Crown Autowor...
 
Notifications
Clear all

Shop: Crown Autoworks Valo [Haku, Smokiegun, Hyped]

109 Posts
21 Users
0 Reactions
83.8 K Views
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
Topic starter  

# Kazern :
can you guys do a top secret s15 rap on my s14 it stock kouki body with lip

Pictures for reference? Should be able to, I can quote you if I see what you mean.

# CALLmeSCOOBY :
Ok i will go tomorrow to pick up the engine for the B5, and then in the upcoming days ill bring it ower for the swap, but before that i need to pick up a cheep ass car to daily it for the month while the car will be in the shop.Once i have a 2nd car i can bring the B5.And i still didnt find S4 brakes and trailing arms, but i can do that later.I doo need to know how much will it cost, since im slowly going down the drain.

I'd recommend getting the new beater and then bring the B5 here. It'll be a minimum of 2 weeks so I'm sure you can find the missing components in that time and then we can just keep on working at it. For everything you're looking to do with the car, I'd say it'll probably be about V$1600 when all is said and done for labor and time, if you are the one providing all the parts. Does that sound alright to you?

# ThatBoostedGuy :
Yeah, I'll drop it off tonight.
((I guess just pick a realistic time for it to be done, and I'll upload pics :doge🙂)

We'll get to work tomorrow morning and it should be done by tomorrow evening, so long as nothing else is wrong with the car once we get those bits undone 🙂)

Should be about V$900 for parts and labour, will be fitted with a tein coilover kit we have stocked at the shop made for the AE86 specifically.



   
ReplyQuote
Smokiegun
(@smokiegun_11970)
Honorable Member
Joined: 12 years ago
Posts: 636
 

@Haku, can I put my GT86 at the garage storage parking? I don't need it anymore and I'm trying to sell it, maybe we can just make it an example of a built car we made?



   
ReplyQuote
CALLmeSCOOBY
(@callmescooby_14433)
Reputable Member
Joined: 12 years ago
Posts: 359
 

# Haku :

I'd recommend getting the new beater and then bring the B5 here. It'll be a minimum of 2 weeks so I'm sure you can find the missing components in that time and then we can just keep on working at it. For everything you're looking to do with the car, I'd say it'll probably be about V$1600 when all is said and done for labor and time, if you are the one providing all the parts. Does that sound alright to you?

Yep, sounds good.Engine will be bought this week, probably the 2nd car aswel.After that the car comes to the shop.



   
ReplyQuote
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
Topic starter  

# Smokiegun :
@Haku, can I put my GT86 at the garage storage parking? I don't need it anymore and I'm trying to sell it, maybe we can just make it an example of a built car we made?

So long as it's in your spot you're good 😉

# CALLmeSCOOBY :
Yep, sounds good.Engine will be bought this week, probably the 2nd car aswel.After that the car comes to the shop.

Can't wait to get to work, going to be an interesting project.



   
ReplyQuote
Hyped
(@hyped_18966)
Reputable Member
Joined: 11 years ago
Posts: 258
 

anyone at the shop? because i want to know if the front clip arrived



   
ReplyQuote
ghostchips
(@ghostchips_10815)
Active Member
Joined: 12 years ago
Posts: 16
 

Could you get a hold of some body parts for a 1995 Toyota Corolla? Mainly after front bumper, rear bumper, bonnet and a boot. Can be aftermarket or factory. Not bothered. Also after a set of shocks and springs don't care what they are as long as they get me low and handle good.



   
ReplyQuote
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

Could you guys turbo convert my non turbo SR20 in my S15? It's really lacking with only 170 horse, plus it looks alot faster then it actually is.



   
ReplyQuote
Kazern
(@kazern_18915)
Reputable Member
Joined: 11 years ago
Posts: 460
 

dxg are you mechanicly minded at all? i have a full turbo engine ecu loom etc



   
ReplyQuote
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

Yes, I do turbo conversions all the time for buddies, but wanted I didn't have the parts. What all are you selling?



   
ReplyQuote
Kazern
(@kazern_18915)
Reputable Member
Joined: 11 years ago
Posts: 460
 

ill sell everything you need as i now have my 180 registered i dont need the s14 on the road and i can remove the sr



   
ReplyQuote
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

Can you do $500 possibly?



   
ReplyQuote
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
Topic starter  

# Hyped :
anyone at the shop? because i want to know if the front clip arrived

Yes, been hard at work just saw this, sorry.

# ghostchips :
Could you get a hold of some body parts for a 1995 Toyota Corolla? Mainly after front bumper, rear bumper, bonnet and a boot. Can be aftermarket or factory. Not bothered. Also after a set of shocks and springs don't care what they are as long as they get me low and handle good.

Yes, we can do this but may take a couple days of sourcing parts and will probably be from junk yards so if you don't mind that they won't all be the same colour at first but either we can wrap it or you can get it painted somewhere. We will only pull parts in the best condition.

Parts & labour will be about V$1000 give or take after we find all oem parts for you, lowering it should be another V$500 just because there aren't a lot of options for your car but we can mix and match to give you the best balance of handling and lowering.

If you want to wrap the entire car that would be another V$1200 but that's not as important as getting your car completely together and ready to roll.

Let us know and we'll start sourcing parts right away.

# dxg1997 :
Could you guys turbo convert my non turbo SR20 in my S15? It's really lacking with only 170 horse, plus it looks alot faster then it actually is.

We could do that, but I will recommend to you now that you build the engine more than just adding forced induction. The SR20 bottom end does not like much power upgrades on stock block and may cause you some issues down the line, going NA to T is good on some engines but on NA 2JZ, NA SR, and some others, it's not as lucky. If you can get the turbo kit from Kazern then we can build the engine for you to handle the power in the form of a built bottom end, potentially stroking it to 2.1 or 2.2 with completely new bottom end from crank to pistons basically. Let me know and I'll get you a quote for it.

Added 1 minute later:

# ThatBoostedGuy :
Yeah, I'll drop it off tonight.
((I guess just pick a realistic time for it to be done, and I'll upload pics :doge🙂)

Your car is completed and looking good, come pick it up whenever 🙂



   
ReplyQuote
Hyped
(@hyped_18966)
Reputable Member
Joined: 11 years ago
Posts: 258
 

ill come to the shop with the stagea in a bit. If you could start unloading the crate?



   
ReplyQuote
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

Sure, gimmie a quote on building my motor to, say, 310 wheel horse maybe?



   
ReplyQuote
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
Topic starter  

# dxg1997 :
Sure, gimmie a quote on building my motor to, say, 310 wheel horse maybe?

I can do a few things for you.

  1. I currently have a 2.0 to 2.2 Tomei stroker kit in shop that I got a deal on. I could install this at the cost of what I bought it for, plus labour, for V$3400. Costly but if you only want to make low power like that, you'll practically never have to worry about the stock bottom end of the SR engine.

  2. I have an SR20DET Blacktop from an S15 with an upgrade to a Garrett T28 Turbo, as well as a full greddy intercooler set up (intercooler and piping) and an HKS Blow off valve all ready to go. I'd sell the engine to you and install it for V$3200 which is hardly making me money as is. That will get you to your 310 wheel easy and the engine has only 45,000KMs on it and has been well maintained, so it'll last you well so long as you're not doing much more to it.

Realistically the stroker kit will easily put you over 310 with a good tune and turbo kit, probably more like an easy 400 on medium boost. At that point it will become a bit more expensive as you'll need more upgrades and you'll be looking at a new ECU, new injectors, and a tune as mentioned earlier. If this interests you then we can go ahead and do it. The 3400 is including all the supporting mods mentioned above and includes the turbo install labour, but a full tune will be an extra V$500 and we'll do it right.

If you're only looking to make 310 you would actually be able to get away with it on stock NA block and I would recommend that if you don't want any more power than that, just do the turbo kit alone properly and you'll be set. So lastly,

  1. We can install the turbo kit and tune the car for you to run healthy for just $600. That should be good enough as I explained earlier and I don't want to charge you a bunch of money for things you don't need, I'd rather do it right but to the customer's liking.

Those are the options I have to offer, let me know if any of them interest you, but if you do eventually want to make proper power then I recommend that you go with the first option because making more power on a built engine will be more reliable and easier than making more power off stock block and turbo kit. I just don't want you blowing your engine up, trust me I've been there 🙂)

Added 1 minute later:

# Hyped :
ill come to the shop with the stagea in a bit. If you could start unloading the crate?

Done earlier for you, put everything over in your work space for you.



   
ReplyQuote
Page 2 / 8
Share: