Custom osd Help

hitman3695

Hi, I made a custom osd and I need some help setting it up.
It idles correctly at 900rpm - No problem here

But I've set the car to go 10000rpm and it goes to 9000rpm instead. How do I fix this problem? Please help!!!

What do I need to change here?
Spoiler: osd_gauge 0x00000000 0.400 -1.050 1.0
osd_rpm 0x0000BAA4 2.060 -0.900 -0.001 0xFFFFFFFF %03.0f
osd_rpmpin 0x0000BAA5 2.060 -0.978 0.000 3.70 -0.00045 -0.5 4.75
osd_gear 0x00020058 0.775 0.540 0.0000 0xFFFFFFFF N123456R //0.015
osd_speed 0x00020058 0.755 0.769 0.0000 0xFFFFFFFF %03.0f
osd_mileage 0x00000000 0.705 0.725 0.0000 0xFFFFFFFF %06.0f
osd_turbo 0x0002005C 0.815 0.770 0.0000
osd_nos 0x0002005C 0.760 0.850 0.0000
osd_damage 0x00020057 -0.480 0.850 1.0

osd_emergency 0xFFFFFFFF 0.000 0.000 0.000
osd_abs 0xFFFFFFFF 0.000 0.000 0.000
osd_asr 0xFFFFFFFF 0.000 0.000 0.000
osd_hbrake 0xFFFFFFFF 0.000 0.000 0.000

I want it to do the right rpm's
Thank You 🙂

adnan54

Is the same of the internal gauges.
Look This

The difference is that it is turned 90°, then 0 is in +1.5.

Added 31 seconds later:

btw, nice osd

hitman3695

# adnan54 :
Is the same of the internal gauges.
Look This

The difference is that it is turned 90°, then 0 is in +1.5.

Added 31 seconds later:

btw, nice osd

Is there like a limit to where it can go up to?
Thanks btw

Added 1 hour 4 minutes later:

I managed to match the rpm's but it still won't go past 9000rpm I've tried everything.