Door Panel Help

hitman3695

I downloaded an Acura Integra from somewhere and when I install the butterfly door (Door 2) I can't put the door panel on. It only workd on the normal door. I've looked in the CFG's and they both seem to be the same.
Spoiler: # Vehicle importer wizard generated part configuration file #

resource ID of this part: 0x00000115

resource alias of this part: "FL door"

render 0x0000009B
mesh 0x0000009C
texture 0x00020025
click 0x00000140

body -0.007 -0.052 -0.015 0.000 0.000 0.000 30.000 cars\racers\Baiern_data\meshes_phys_FL_door.scx ;0x0000001B

total mass: 30.000 kg

category 2

slot -0.000 0.000 -0.000 0.000 0.000 0.000 5 ; FL_door
attach 0x00000006 5 ; chassis->FL_door
attach 0x00000016 5 ; chassis->FL_door
attach 0x00000026 5 ; chassis->FL_door
attach 0x00000036 5 ; chassis->FL_door

slot -0.150 0.137 -0.420 0.000 0.000 -0.262 24 ; L_mirror

slot 0.041 0.274 0.128 0.000 0.000 0.000 6 ; FL_window

slot -0.002 -0.115 0.007 0.000 0.000 0.000 25 ; FL_window

'FL door' deflector

wing 4 -0.047093200 0.027668700 0.022362200 -0.851689000 0.288567000 -0.005169600 23.074050000 -0.250 0.666

stockpart 0x0000010E //Fl_window
stockpart 0x00000104 //l_mirror

eof
Spoiler: # Vehicle importer wizard generated part configuration file #

resource ID of this part: 0x00000121

resource alias of this part: "FL door 2"

render 0x000000BB
mesh 0x000000BC
texture 0x00020025
click 0x0000014C

body -0.007 -0.052 -0.015 0.000 0.000 0.000 14.000 cars\racers\Baiern_data\meshes_phys_FL_door_2.scx ;0x0000004F

total mass: 14.000 kg

category 2

slot -0.000 0.000 -0.000 0.000 0.000 0.000 586 ; FL_door
attach 0x00000006 586 ; chassis->FL_door
attach 0x00000016 586 ; chassis->FL_door
attach 0x00000026 586 ; chassis->FL_door
attach 0x00000036 586 ; chassis->FL_door

slot -0.150 0.137 -0.420 0.000 0.000 -0.262 24 ; L_mirror

slot 0.041 0.274 0.128 0.000 0.000 0.000 6 ; FL_window

slot -0.002 -0.115 0.007 0.000 0.000 0.000 25 ; FL_window

'FL door 2' deflector

wing 4 -0.071538600 -0.006596910 0.082961000 -0.827695000 0.278647000 -0.002523950 22.407450000 -0.250 0.666

stockpart 0x000000FE //Fl_window2
stockpart 0x00000104 //l_mirror

eof

Please help so I can put the panel on

robban_9000

Then u need to edit the door panel cfg 🙂

RedCarDriver

There's two ways to do this:

Change the door panel CFG, as Robban suggested.
Make the second door use the same attachments as the first one. Do this in the CFG of the second door:

slot -0.002 -0.115 0.007 0.000 0.000 0.000 25 ; FL_window
compatible 0x00000115 25
...where 0x00000115 is the ID of the first door, and 25 is the slot in the first door being referenced. (See the chassis CFG for any chassis other than the "basic" one.)

I hope this helps!

hitman3695

# Harrison15 :
There's two ways to do this:

Change the door panel CFG, as Robban suggested.

Make the second door use the same attachments as the first one. Do this in the CFG of the second door:

...where 0x00000115 is the ID of the first door, and 25 is the slot in the first door being referenced. (See the chassis CFG for any chassis other than the "basic" one.)

I hope this helps!

Thanks you so much. With the driver door only the standard black panel and the green panel work but not the red and blue panels and the passenger door I managed to get all panels to work I just don't know why driver door is having trouble

Added 2 minutes later:

It's ok I got it to work Thanks again