SLRR Roleplay Car builds

couger389 · 2014-09-21T04:07:21+00:00

What is up my fellow Vstancer's. While sitting in the jail we all call school. I thought of an idea that I thought would be pretty cool. I am going to take you through my 1-2 week build of this S15 on SLRR. Now this will have some roleplay involved since I could easily build this thing in 30 mins. So I will break this into small bits and post about it everyday. Feel free to ask questions, add suggestions, or even add to the roleplay. Also, post your own builds! Now enough of the boring stuff let

conkaa

so after searching for another 240 for a while, i found one
apparently he was going to tun it into a drag car? dont know why?? but what ever
its currently ls3 powered? no idea how he fit that in there but im not one to judge
he said he wouldnt go lower than 3.5k
anyway here is the car

ShadowPhoenixTar

# ThatBoostedGuy :
the typical JDM fan would become increasingly butthurt about the "ruined car"

/rant

Well, the R32 is quite heavy, so I wouldn't mind, since the RB26 is quite heavy as well. If you swap a heavy engine with a heavy engine, to a heavy car, the power-to-weight distribution, and the weight distribution, wouldn't be too disturbed/ However if you swap a light engine with a heavier one into a light car, like for example a 110mm bore/stroke V8 with quad turbos into an AE86, I will have a talk with you.

/rant end

David_2709

I thought about the Cobra R front bumper again - and came to the conclusion that I don't want to install an original one. With only 300 units ever produced I don't want to ruin an original one. I sold it to a Ford Performance Dealer that knows his stuff. Instead I got a gray Replica. Also a black Cervini spoiler, which will be painted in Ford Laser Red like the old front bumper. I also got black headlight housings - for the looks 😛 I also installed Coils and Springs (Onmi Full Body). I couldn't wait to install these things so I instantly took all parts off. Not the brightest idea to work on a car midweek. The Bus will do for 2 days.

Next thing will be a engine modification (intake, fuel rails, maybe cams, headers if I scratch the money together)
Sold the old yellow Civic too. The car wasn't worth much anyways

Tom_Diablo

I've just finished mounting the rotary into the Civic. Was pretty straightforward but it doesn't run yet. No fuel lines, no wiring, no nothing. I have to re-route the exhaust pipe since the tunnel will be used for the driveshaft. I've also managed to get a Miata driveshaft + diff and they are at a driveshaft specialist for some modifications. I gave him the measurements it has to have so it'll fit nicely.

CALLmeSCOOBY

Sup all, was lately more in lurk mode, was waiting to get few things seteled to post update.Basicly as u know the Golf was almost done last time and its all done till now and its registered and on the street.Love the clean look.

The reason i was waiting was that we needed a new daily since me and my darling are arguing owe the daily all the time.And in the end i ended with a new car and she has now the E92.

Its a 97' Audi A4 B5 1.6, its haveing 250000km and its in rlly mint condition, the engine is rlly exhausted but works perfectly fine.picked it up for arround $3000.Its previouse owner put some BBS rims on it but oiweral its stock.Drives good, feels good, guess its time to ruin it. 😃

cheers

Haku

Last night I finally put the finishing touches on an S13. If you've been around for a while, you'll remember my rotary powered 240SX which i spray painted. It was dubbed "Sharkey" and was sold, however I bought it back a while ago and never mentioned it again. You may also recall that I converted my S13 back into an onevia. I actually got that front end from this car and put the S13 front end onto sharkey, to put Sharkey V2 in motion. Believe it or not, after owning so many S13s and 240SXs, I've actually got a whole room dedicated to S13 model parts, including aero, lights, interior bits and pieces, and anything else you may need to put one of these back together. I put my left overs from the other S13 and revamped this car. It's true to what it was when I bought it, though not the original engine it came with, this one has a 13B that should put out anywhere from 500 to 700 wheel horsepower. It's a bridge ported twin turbocharged rotary running all upgraded internals and can run 98 Octane or Racing gas depending on what I want to put in. Revs to 9K and the sounds are insane.

Day time pictures will come, and I'll either paint it or spray paint it just like the original sharkey.

Spoiler:

RedCarDriver

Wow, nice work with that. That's almost too nice to paint with a rattle can, tbh.

Chugle

Well, some stuff happened recently. I was ROBBED! Some cunt in this black Suburban appeared to have a bullbar decided to slam into my car as i was exiting my driveway, and at this point i wasn't really aware of what was going on, and the last thing i remembered was 4 dudes getting out the car, and one of them opening my door and knocking me out. I woke up in a hospital a few days later, after being in a COMA. That's right, a COMA! Long story short, they stole my 240sx, my Prelude that i was driving was crushed, and my house was looted, and burned. Luckily I had insurgency for everything that was stolen, and another long story short, I'm rich off that insurance money. So, some new stuff is coming...

Haku

# Harrison15 :
Wow, nice work with that. That's almost too nice to paint with a rattle can, tbh.

I'm with you on that, however not really sure how I'd like to colour it 🙂)

marcus915

MIDNIGHT PURPLE.

Falken_HD

Bought my first project car! Its an awesome starter car..it came with a 347 stroker (stock 302 bored and stroked to a 347) with a B303 cam, shorty headers into true dual magnaflow mufflers dumped, cold air intake, new distributor, some mags on skinnies up front and 255 street tires in the back..its got 414hp/362lb-ft from what the previous owner said..well here's some pics of it! Lemme know what you guys think!

ParkerFM01

Thanks for all the help guys.

I would tell you if it runs but I have no clue... I still have to hook everything up and put oil in it. I'll keep you posted, though...

Added 4 minutes later:

# Falken HD :
Bought my first project car!

Welcome to the #mustanggang m8

RedCarDriver

# Haku :
I'm with you on that, however not really sure how I'd like to colour it 🙂)

# marcus915 :
MIDNIGHT PURPLE.

This.

marcus915

so I mean, this car stayed at monster truck height for quite some time now. I think I know what I want to do though. I sussed out a set of SSR Speed Star MKII's, 15x9J all around. Fit snug under the stock fenders wrapped into Toyo Proxes R888 rubber.

Going to drift this thing at grassroots events (has a Cusco LSD already and a good SR20DE) until that blows up, then I'm going to do a full rebuild and 1JZ swap and Type X. Basically going to become the street car version of my Sil80 (Which originally was meant to be a street car).

Lagano

What's up guys? I haven't posted anything about the Supra for a while, mostly because i was searching for parts. Andrej, my friend who has the tuning shop, was more than happy about the HKS engine i found, but the rims seemed a bit too expensive for him, but he didn't mind, we got the engine for cheap anyway.
After we bought the parts needed, we decided for some decoration 🙂
Andrej managed to get some suspension parts from a local part dealer: K-Sport coilovers, front drift-spec suspension arms (more steering lock) and some 7" springs. For now i will probably keep the rear suspension arms stock, because the rear end drifts a lot. And that's exactly what i need. 😃 You may have noticed that the front end is a little too high, but that's because there's no engine installed yet.

Final summation: We've done quite a lot of progress, i'd say we're almost done! But we're still waiting for the engine and the 19" rims to arrive. The rims i have now are still for sale for 300€. They are a bit used, but in good condition.

conkaa

240 update

started stripping the car down for a respray so its sitting on some random steel wheels that i had lying around
iv'e already primed it,

the bad: i believe the frame is bent, not really unexpected tbh, it was a missile
the quarter pannels were rusted/bent to all hell so i junked them,

sorry for cellphone pic

NK748

Hi guys! Some news from the shop :

The tow truck restoration is on its way i removed the awful front bumper and trashed it. The tow part has been taken down to grant acces to the chassis.

In the meanwhile bodywork is done on the Miata but there's no engine yet.
Today, a container arrived with two client's orders.

The Supra is in mint condition with its original N/A 200hp engine and automatic gearbox.

The RX-7 is kinda rusted and damaged but this is a full rebuild project so the original shape doesn't matter too much.

A friend comes from time to time to help me but he's got a life too, so great news for you car enthusiasts, if you're jobless, i'm hiring a mechanic OR an bodyworker.
Please come by the shop to apply.

ParkerFM01

So, my cars are painted... The Supra is now grey, and the Mustang is the same as it was before, just the front clip matches now...

I didn't think I needed flares on the JZA80, but, I probably do because, look...

FamousMan

Soooooooo it's 2:00 am and I can't sleep, who wants to help me with some 240 stuff?

conkaa

^^ yeah man ill swing by!

« Previous Page Next Page »