SLRR Roleplay Car builds

couger389 · 2014-09-21T04:07:21+00:00

What is up my fellow Vstancer's. While sitting in the jail we all call school. I thought of an idea that I thought would be pretty cool. I am going to take you through my 1-2 week build of this S15 on SLRR. Now this will have some roleplay involved since I could easily build this thing in 30 mins. So I will break this into small bits and post about it everyday. Feel free to ask questions, add suggestions, or even add to the roleplay. Also, post your own builds! Now enough of the boring stuff let

dxg1997

Found something that's a bit different from what I've seen so far, and decently rare, but abused quite hard. I'll post pictures in a little while

DeXXter

Went over the VANOS system and replaced the piston seals and cleaned the solenoid

would be interesting where you found the Vanos on a i4 BMW Engine.

David_2709

320i upwards you have single VANOS, only available for the six cylinders 😛
The M3 has double VANOS tho

DeXXter

And the i4 got Valvetronic which is like Vanos light vut not that model year i think it started somewhere around 2000

ParkerFM01

I bought a daily. I needed a car as the Mustang was sold to an amateur drift team in New Jersey. If anyone is down that way and happens to see a Black Mustang doing mad skids with a 2JZ soundtrack, you know where that thing came from. Mind you the swap didn't really work, as I am just getting started but hey, I'll learn. Atleast it runs, for the most part xD.

But yeah I will get pics when I am home, picked it up for $1200 from some curly haired kid. (Totally not that guy from that YouTube channel) It's a BMW E34.

marcus915

good luck then, so many problems but you can lay a mean peel in reverse so that's something right 😛

Haku

I go hard in the mf paint. Also loving this car so far. Needs some improvements, but all in due time.

Added 48 minutes later:

RX7 Progress is here;

Old 13B ready to come out

Out with the old

In with the new

Here's a run-down of parts

Extended Ported Block/Rotor Housings
Blueprinted crankshaft
High compression rotors
Aftermarket Aluminum Flywheel
Exedy Stage 2 Clutch
Custom 3" Downpipe
Haltech ECU
750cc injectors
Turbo by Garrett GTX3076R
Greddy Intercooler & BOV

Currently makes 565WHP at 1.6 BAR (23.52 PSI)

Rear diff has also been upgraded to a new Viscous LSD with 4.10 gears, should hold the power I'm currently putting down. Transmission has also been changed to a recently rebuilt (and hard to find) PBS MDR-1 5 Speed Dogbox transmission.

marcus915

^ Nice af, let's go street sharking together once I get my R32 lower and wider. I've been meaning to go dogbox on the 2J but I'm pretty content with the R154.

And MjM thanks very much! Your JZS161 looks mean but you'd probably be impounded the second you rolled into Ocean City hahahaha.

I'm a wheel addict oops. Pulled the Blitz Type 03's and SSR Formula Mesh off the car and fitted a new set that I bought off a good friend of mine today, a set of 17x10 Regamsster Evo's, +12 offset. Fills the widened fenders very nicely on my stenciled Yokohama's.

Also have a Chuki front bumper on right now, absolutely tore up the pignose bumper on a pothole so I'm rocking this for now.

Fitment game is almost onpoint!!!

Sekailain

# Sam C :
This thread is a joke to be honest. Everyone is wanabe mechanics, calling people out on realism when they fail to realise they arnt being even slightly realistic at all.

# David_2709 :
yasssssss finally somebody sait it

# StanceMonster :
dude really? this is a freaking game tho ! we're free to do whatever we want. this tread isnt about being the most realistic person, its just to express our creativity and to socialize about our passion which is BUILDING CARS !! so if you're going to complain on every build because you think they're not "realistic" we'll they're this little X in the top right corner of your screen, just press on it man, just do it

Added 14 minutes later:

here's my STI ! it's almost all stock execpt for the red tail lights and for the cat-back magnaflow exhaust system - i really want to put money in this car, i'm about to build it as a stance car - i want a racing-drifting car, what should i buy?

totally agree :awesome:

you need a pair of HKS Turbocharger with front mount intercooler... it gave a lag but it was worth it 😃

Added 5 minutes later:

Finally after waiting for 2 weeks, my bodykit arrived!

it's painted in white and also paint the rims black for more aggresive look and added a GT-Wing. My goal are make this car looks like Track Day car. so, i don't give a damn for people who didn't like it 🙂)

anddd finally it's finished!

here's the result

Nissan 350Z

Bilstein Coilover
Brembo BBK with 6 Pot at Front and 4 Pot at Rear
Wedsports TC150n 19x11 (Painted in Black)
Bridgestone Potenza RE002 Adrenaline
HKS Exhaust
VR38DETT Engine Swap with V Shape Intercooler-Radiator Mount
Ings+1 Bodykit (Front Bumper with Carbon Lips, Sideskirt and Rear Bumper)
GT Wing Carbon
JDM Z33 Badge
JDM NISMO Red Badge
Seibon Carbon Fiber Mirror Covers
Seibon Carbon Fiber Trunk (Painted in White)
Custom Nissan GT-R Style Carbon Fiber Hood
Custom Cutting Sticker Carbon Fiber for Roof
JDM Black Housing Kouki Headlamps
JDM Black Housing Kouki Tailights with Clear Glass
Black Nissan Logo (Front and Rear)
Black Door Handles
Tinted Rear Indicators

marcus915

The JZA80 was sitting for a while since I didn't have the time to drive it often, and I was paranoid of destroying the Ridox aero. I took it out for a Sunday drive and realized all the aero was hanging really, really low and I just couldn't have it without bagging it, and I will never bag my Supra. I ended up selling my Ridox aero to a friend of mine who has a JZA80 as well, and he paid me a very good price to take care of my aero and he also took my 350Z wheels too, so I was left with this for a week.

Until the new set of wheels I ordered came in; SSR Vienna Schnitt, 18x10.5 in the front and 18x11 in the rear.

But then I mounted my set of AVS Model 5's to get a feel for what they look like and now I'm really conflicted..

I'm not sure which set of wheels to run, , and I have to get some OEM bumpers. Should be pretty easy.

giacomo1215

# marcus915 :
Spoiler: The JZA80 was sitting for a while since I didn't have the time to drive it often, and I was paranoid of destroying the Ridox aero. I took it out for a Sunday drive and realized all the aero was hanging really, really low and I just couldn't have it without bagging it, and I will never bag my Supra. I ended up selling my Ridox aero to a friend of mine who has a JZA80 as well, and he paid me a very good price to take care of my aero and he also took my 350Z wheels too, so I was left with this for a week.

Until the new set of wheels I ordered came in; SSR Vienna Schnitt, 18x10.5 in the front and 18x11 in the rear.

But then I mounted my set of AVS Model 5's to get a feel for what they look like and now I'm really conflicted..

I'm not sure which set of wheels to run, , and I have to get some OEM bumpers. Should be pretty easy.

Absolutely go with the model 5's, imo.. and don't worry. I got a buddy of mine who's parting his out. I'll give him a call in the morning 🙂

In regards to my own cars.. I got the rb block bored! Put her all in together once again, but by the time I finished, it was too dark for any pics. However, I do have pics of my EG! I cut the coils like a bitch and borrowed my friend's wheels! :3 Thoughts?!

Sekailain

# giacomo1215 :
Absolutely go with the model 5's, imo.. and don't worry. I got a buddy of mine who's parting his out. I'll give him a call in the morning 🙂

In regards to my own cars.. I got the rb block bored! Put her all in together once again, but by the time I finished, it was too dark for any pics. However, I do have pics of my EG! I cut the coils like a bitch and borrowed my friend's wheels! :3 Thoughts?!

i think watanabe are good for this civic... or maybe TE37v

2jzCookie

# DeXXter :
would be interesting where you found the Vanos on a i4 BMW Engine.

Considering that people on here can build cars from a rusted out chassis with no engine, no running gear no nothing, I dont see why u choose to point out my rather small fault. Yes ur true about what your saying but really?

Yes the VANOS system came in 1998.

Tom_Diablo

Praise craigslist! Found a complete Corrado VR6 interior for a reasonable price in Salt Lake City. Went there with a Ford F-250 I borrowed from a buddy of mine. Since my RIEGER Corrado is based on the VR6 model, everything bolted right in. The steering wheel is a momo with adapter.

CALLmeSCOOBY

What is up everybody!!!Im back after a huge pause from SLRR.Here is just a smal update on everything, i sold my Subie, and the Cressy aswel, right now im rolling in a Acura GSR.Grounded with some nice deep dish Weld rims, engine is a Duhan 2.0T runing on dual webbers and is putting arround 0.7 bar boost.The only car i still own from the old days is the green Golf MK3.Here are a few pics.Will get better pics of the Golf when i go for a drive, its in the garage and i mostly drive with my Tegy.

dxg1997

Sadly the Starion fell through. The frame was too rusted to try to repair. (Real reason is no 3d engine bay, just a decal) might look for an old VR4 Galant maybe...

David_2709

got tired of my E36. Is up for sale.

I got the missing trim of the junkyard, as well as the front grille. For the not opening passenger door, I found the problem. It was a cut cable on the right under the dash. I dismounted the dash and need to buy a new cable. I also changed the 15" rims to 16" winter steelies that came with my E36. The tires on the alloy wheels are worn, I'll give them up for sale when I'm done with the Volvo.

dxg1997

^that clutch pedal looks so far away xD nice ride though

DeXXter

# 2jzCookie :
Considering that people on here can build cars from a rusted out chassis with no engine, no running gear no nothing, I dont see why u choose to point out my rather small fault. Yes ur true about what your saying but really?

Yes the VANOS system came in 1998.

Well thats the reason i don't read most of the stuff in here anymore. I like your build cause i got one and for god sake i didn't pointed it out to make it look like an unrealistic build but just to give you something to read about on the interwebs. Or did i said “look at that idiot“ i dont think so.

Ey_papa

Here is an update on my supra...

I am building the Engine, so I went with a Single Turbo Conversion, I change the camshafts, And I will change the clutch soon

And s friend of mine put 86GT panels to see how it look, I will put Stock one back on it.

« Previous Page Next Page »