SLRR Roleplay Car builds

couger389 · 2014-09-21T04:07:21+00:00

What is up my fellow Vstancer's. While sitting in the jail we all call school. I thought of an idea that I thought would be pretty cool. I am going to take you through my 1-2 week build of this S15 on SLRR. Now this will have some roleplay involved since I could easily build this thing in 30 mins. So I will break this into small bits and post about it everyday. Feel free to ask questions, add suggestions, or even add to the roleplay. Also, post your own builds! Now enough of the boring stuff let

Pinter

# NothingToDo :
Completely new suspension, seats, new rims, and engine twisted from 202hp to 357hp by adding new, better cranckshaft, camshafts, gearbox from Ishima Enula (owners of this car will know that this car's engine is a ishima block with ishima, einvagen and duhen parts), Turbocharger from shimutshibu, and new fuel rail. Now this car runs on 98 octane gas instead of 95, which gave me +5hp.

Im quite suprised that someone actually uses names from slrr (Ishima, Duhen, Shimutshibu, ect..)

NothingToDo

# pinter03 :
Im quite suprised that someone actually uses names from slrr (Ishima, Duhen, Shimutshibu, ect..)

Well, I don't like to act actually that there is a fiat engine and I tuned it, since my vision of SLRR is that this is separate world, universe. Why I should act since no one cares about this?

Pinter

# NothingToDo :
Well, I don't like to act actually that there is a fiat engine and I tuned it, since my vision of SLRR is that this is separate world, universe. Why I should act since no one cares about this?

Seems pretty logical...

marcus915

Put on some huuuuge spacers, and bought a set of Work Emotion CR2P, two piece version of the Emotion CR's. Beautiful rims.

My focus now is to get the 200SX finished up, then this car finished up, and do a full overhaul on the motor in this thing.

Haku

# NothingToDo :
Had some fun with this:

Man don't put other people's lives in danger. If you're going to street drift, do it when no when else is on the streets and you won't be risking someone elses life.

(and yeah I realize this shit isn't real, but it's a mentality and a roleplay thread. B) )

Added 1 hour 14 minutes later:

Before I commence with 240 trash, I want to just throw up two things about the 370.

One, I got a Nismo lip.

Two, what do you guys think of the wing? It's not installed, it's just test fit at the moment. Not 100% sure about it.

Moving on, I installed new wheels on the 240 & gave it a makeover. The wheels are 18x9 Enkei RPF1s.

Half pig half shark B)

Ey_papa

I got New info on My Focus ST...

I add a KW Coilover kit (Fully Adjustable), some Ross Stance Wheels

It's My daily driver, so it's not Stance

marcus915

that is a ratchet ass 240! Loving how the front lip is done up like caution tape. the 370 looks hella smooth, but ditch that wing for a BCL one. The metal struts of the BCL wing just look so much better.
A friend totaled my 200SX last night. Took the car from my shop, took it up in the hills and started drifting it, ended up taking it down the hill. Car was pretty much a writeoff, he was fine. Car was brought back, was a mess. Could salvage pretty much nothing, but most of the motor was surprisingly intact. Pulled the motor and scrapped the rest of the car. Managed to get my hands on a clean 240SX roller. Going to continue my same plan.

NothingToDo

Marcus, just a thing, you might like to use a mod that removes the driver, since in your yota he looks like he's got brocken neck. Just suggesting, if you won't like to do it, then fine.

So yeah, my friend gave me an information that someone wants to sell 1974 porsche 911 turbo to good hands in Valo. The guy was named Damon and told me that he will be a father in close time and want to start a more responsible life. Porsche was orange, with rear suspension that seemed to be a bit broken. "Why we won't go on a test ride?" -he asked. I asked if he did any modifications except for new rear bumper and new exhaust. "Just a minor engine stuff"- he said with a misterious smile.
So we gone! First thing I heard is turbo spool. Well it is a porsche turbo, so why it shouldn't be?"Cmon, turn off the cruise control and step on it!" - Damon said. So, I stopped on lights, stepped on it... and the car fired out! We did 100 km/h in about 2.5 seconds, I think!

That was the mistery- Damon swapped engine to a mighty Devil's V8, an engine that is extra rare and very liked in valo, due to its not so big price (V12's block that can make less horsepower cost 200.000 $!) but very big possibilities.

It was turbocharged. Eight turbos. W/o intercooler. "It didn't fit there"- he said. How many horsepowers? 1100-1200.
He wanted 50.000 $. Pretty cheap for 1000hp car, huh? I broke a bumper a bit and lost one headlight, because I forgot to turn on the cruise control and crashed right into the wrecker. But even with this collision, today was a good day!

Facepalm

Ok so I've been gone for quite some time, so here's a quick update on my cars.

The Cefiro got a widebody kit, spacers, and it got painted black.
Before paint and spacers

After paint and spacers

And here's my new daily. It's an El Camino, and it looked like it was in a bad condition. It was quite pricey, but I found out why when I saw the engine.

It had some racing modifications here and there, and only because of that, the price was raised. I bought it at the same time I bought the widebody kit for the Cefiro.

And here she is now. I'm probably going to bag her, and make her a lowrider, but you never know, I may just change the colour and leave it as it is. I've still got the steel rims in case anyone's wondering.

That's all I've got for now guys. I'll keep you updated more often this time.

Also I should mention, I may change the Cefiro's colour.

Hudas

Finally got my personal number plates and went for little drive

Found oem gts bumper, once it gets painted its going on

while bumper is at paint shop got my hands on some 19x10 and 19x11 HRE 505's with sticky semi slicks

Traided my HRE's for ADV.1 in same specs, and finaly gts bumper went on. It was time to visit the green hell

Found out that nurburing has hardcore walls. New bumper, headlight, fender, rims, lower control arm, radiator, front coils incoming.

Whole car was repaired by bmw authorized dealer to manufacturer standarts, ADV.1 wheels were beyond repair so I got some 3DSM's instead.

Oh by the way its up for sale!

Haku

@[deleted]

If you want a new colour on the Cefiro you can get a wrap done at my shop for a good price, instead of painting it.

Facepalm

Thanks for the offer man. I'll drop by if I need it changed colour.

zerito

Whats up guys? Its been a while! I was out of Valo doing some work and business but now Im back! I dont have any of my old cars since I sold everything except this BMW that has had a color change since the last time you all saw it.

(Yes thats an SR20 in a E30, denounce me to the realism police if you want)

Anyways as I said, Im back in Valo but this time I have my own small shop where I will work with a few friends. Nothing major its just for fun since I have a career on the IT field now. I have a project car to work on and my friends have theirs so I might be showing them here from time to time. Right now Im working on the BMW thats getting an engine swap to something more efficient since I want to DD it. Details later, maybe.

Haku

(Realism police should acknowledge that it's completely possible and has been done before, you are off the hook)

Welcome back dude, love the car still.

here is what's come of my 370Z since yesterday.

Big Country Labs wing obtained and installed.

I test fitted the other one yesterday to see how a big wing would look because I already had this one ordered and was afraid I'd have to sell it or use it on another car. I can say I'm quite happy with the turnout and agree with Marcus about it looking better than the other one. Also got a new V mounted exhaust setup that's much louder than the previous that came with the car (Hence the #Sorry Mom 😃 🙂) )

A couple stickers got slapped onto the car and that's how it sits right now. This damn thing keeps growing on me, I can't believe I almost traded it right away...

marcus915

That is one sexy Z Haku. Told you the BCL wing would be a good idea 😉

Haku

You were right, now lets see where your 240 goes 😉

marcus915

Speaking of my 240, I've made tons of progress.

Bought my friend's set of Work Equip 03's like my old set, 16x10, had them refinished and done up. Bought a pair of brand new Toyo Proxes R888's, 225's. Bought another BN Sports inverted trunk, Origin Lab 40mm overfenders, Rocket Bunny ducktail, and rear quarter window covers, and got it painted up in a beautiful pearl maroon.

Looking for buy either a URAS or Origin Lab aero set, not sure. Next up is a turbo setup for the SR.

You were right Haku, the inverted trunk is sick when the car is almost all one colour 😛

dxg1997

@[deleted], I coulda done the exhaust for half of what you paid for it, I'm sure.

Update, I took out a decent loan, and bought a good DD, that will likely be used for hauling shit in the meantime. I went and got a 2008 Impreza WRX STi. Its got Obsidian Black Pearl on the color, with some Pure Black HRE RS105's. Looks sick! It also has Varis front and rear bumpers, and some knockoff hood, but it is real carbon fiber. Its got a hatch spoiler, and an exhaust system. The previous owner had big plans for it, racing and everything, but only had the money to put an HKS fuel rail onto it, after the wheels and such. The shifter is short throw, so its only a couple inches between shifts, and their really crisp. The car performs well, and because of the fuel rail it's got roughly 370 horsepower, at the flywheel. Did I mention its a $20k car? I took a loan out for it, and sould have it paid once I enter my next drift competition.

This thing is SO black!

Now for daytime shots.

Even the engine is blacked out!

Fuel rail

Whoever did the exhaust on this thing did a helluva shitty job. The tips stick out too far, and the welding is abysmal.

gianpaul1001

@[deleted] sweet subie and get that exhaust finished

dxg1997

Yeah, I'm actually working on it right now. I plan on doing 2 resonated tips, with a 3.25" turbo-back pipe. I want loud! xD

« Previous Page Next Page »