Author Message

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#1   2017-03-28 19:00          
I'm called Zero and for the past five years i've been basically drifting missiles at Ebisu and it was fun but i never kept a car or even built one properly ( i do have experience with cars :)) ) And i decided to buy the most typical drift car ever known to a car guy.... A S13 Hatch.

Its a bit beat up as this was also drifted at Ebisu but i never saw it run there so im skeptical about that but its decent-ish and i say this because it still has the original CA18DET and the poor little 1.8 has done 150k miles and it should really be blown but its still surviving (barely). It's got a misfire and idles badly so it may be on its way out but im ok with that because i can get a new and better engine.

The car cost me $5200 which is fair since it does come with coilovers and fabricated knuckles (they've been crudly cut)
It has taken damage to the rear - left fender and both front fenders which have been cable tied back together as well as the rear bumper.

Surprisingly it still has the original plate but its quite bent.






Hopefully i can make something good with this shell!

yngsensei

jp
Posts: 336

Location: Japan Yokohama
Occupation: making dope beats
Age: 25
V$: idk
#2   2017-03-28 20:45          
Ayyy finally some Ebisu missile. Can't wait to see what will happen with it. Stop by my garage if you wanna build the car or need any help

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#3   2017-03-28 21:07          
Thanks man, wanna rip this so bad round Ebisu but I don't wanna wreck it

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#4   2017-03-28 21:12          
Nice missile man

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#5   2017-03-28 21:32          
Its a missile for the moment... Should i keep it a missile or go full FD Spec?

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#6   2017-03-28 21:47          
look man if you want a D spec ride i recommend seriously for you buying an shell and beggining from that,this way will spare you a lot of time.and if you need any help dont mid asking me.

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#7   2017-03-28 21:54          
I'm gonna make this a decent missile if that even exists. I could do probably do with some help down the line so stay posted.

So im gonna look for new panels, probably stock and then either get a shark nose or pig nose front end. Which one?

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#8   2017-03-28 22:07          
Well i am not a big fan of pignoses i used to hate but they got an space in my heart when i rolled with my 240 like this.

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#9   2017-03-28 22:15          
Pig noses look awesome however type x kit?

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#10   2017-03-28 23:25          
What to say about i replaced the Pignose with an type X but they are getting way overused and expensive (2-3k)for everthing also for an missile as cheap the body parts are the better

THWOLF00

us
Posts: 260

Location: United States
Occupation: Northside Performance
Age: 23
V$: 83,281
#11   2017-03-29 01:52          
I Just Ordered An Aftermarket Type X Stylle Bumper for 209V$. and A bunch of other Things Lol. But Nontheless. Goodluck Man!

FastCars

jp
Posts: 418

Location: Japan Osaka
Occupation: Not really known Japanese Speed Shop
Age: 28
V$: 3800
#12   2017-03-29 02:00          
Dammm I paid less than half of that money for a complete yellow 1994 180sx type x sr20... But love those cars man..

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#13   2017-03-29 07:37          
Ok..... I'm gonna update you guys with what I ordered and plan to order later today. Keep Posted

Princevolution

jp
Posts: 131

Location: Japan
Occupation: Random worker
Age: 29
V$: 21342
#14   2017-03-29 09:16          
Awesome car dude,But 5K for a missile,That's pretty overkill.

But who cares,I fucking love it!

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#15   2017-03-29 09:35          
# THWOLF00 : I Just Ordered An Aftermarket Type X Stylle Bumper for 209V$. and A bunch of other Things Lol. But Nontheless. Goodluck Man!
Aftermarket's are cheap but an complete nissan one cost about 500-900 bucks

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#16   2017-03-29 10:48          
A missile without a rusted shell is rare that's why 5200

Princevolution

jp
Posts: 131

Location: Japan
Occupation: Random worker
Age: 29
V$: 21342
#17   2017-03-29 10:53          
# Zero : A missile without a rusted shell is rare that's why 5200
Oh right.
I love it nonetheless.

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#18   2017-03-29 13:26          
It's clean for a missile but thanks

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#19   2017-03-29 16:01          
Ordered Parts List:
New panels (stock)
Pignose bumper (decent condition)
Scavenge a new hatch from local junkyard
Find a new engine to put in

To Do:
Sell the beater CA18 - lightly modified
Cut out rear panels and weld new ones in
Fit front panels and bumper
Find new engine
Fit new engine
Drift S!*T out of this beast!

DONE

FastCars

jp
Posts: 418

Location: Japan Osaka
Occupation: Not really known Japanese Speed Shop
Age: 28
V$: 3800
#20   2017-03-29 22:45          
Would a VG38 interest u?

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#21   2017-03-29 23:04          
About an 2uz with t56 tranny would you like it

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#22   2017-03-30 07:36          
I think I'm gonna buy a s14 that's been crashed or scrapped with the SR20

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#23   2017-03-30 20:08          
So spent all day at a junkyard getting new panels and a new hatch which came with a retrofitted R32 GTR wing in some sort of white.
The car the panels came off was red so it looks very odd but they have been rolled and pulled for extra wideness.
So with the panels being wider i borrowed some wheels of my friend and they are BBS RS301's and they 10J and they sit perfect which is good. I did pick up a pignose bumper and rear bumper with Type - X valances
I also got the car registered yesterday so it is now legal and the plates are pretty cool since they sat .. 80




Finances: 14800 - 300 = 14500

14500

yngsensei

jp
Posts: 336

Location: Japan Yokohama
Occupation: making dope beats
Age: 25
V$: idk
#24   2017-03-30 20:20          
Looks great dude

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#25   2017-03-30 20:21          
cool 180 dude starting to look real clean

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#26   2017-03-30 20:22          
Im really wanting to keep a clean look and not go full camber gang bull with this build

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#27   2017-03-30 21:01          
it looks pretty cool definetly needs some sleepy eyes and a paint

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#28   2017-03-30 21:08          
Sleepy eyes look cool as f**k!!

Benny

ba
Posts: 1143

Location: Bosnia And Herzegovina Lukavac
Occupation: Electrictian
Age: 30
V$: V$756
#29   2017-03-30 21:14          
That sunset makes the car look even better, gl whit the rest of the build :D

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#30   2017-03-30 21:36          
Really sets the car off and thanks man, same to you!

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#31   2017-04-19 19:08          
I have been quite absent for quite a while with this thread as ive been doing mad stuff with the Osaka Night Kids!

Anyway i've done quite a lot to do the S13 in spare time. Recently we've had our R34 in for paint so i decided why not paint the S13 at the same time using my own money. So i went with Nismo Super Clean Red which looks amazing on the S-Chassis. I also picked up some parts, an engine! and a few other things.

So the parts? I got a genuine Hot-Road Type-X Front Bumper and bought a Type-X Valance too (brand new one) And these cost me $700 altogether (the hot road bumper costing the most)! I also got a clear red tailights for about $50. The interior didnt change much apart from a LHD Dash and all the LHD conversion pieces (They cost $1000 since they was imported from America), a hydro e-brake and long shifter also found their way into the interior too.(No pics tho)

The Engine is gonna piss a few people off since it's Toyota but not a 1J or 2J, not even a 2UZ...... It's a 20V Blacktop 4A-GE but its fully modified.

The parts the 4A has are as follows;
    HKS Crankshaft
    TODA 20V Pistons
    TODA 20V Camshafts
    TODA Exhaust Manifold to Straight Through / Stock Muffler
    HKS Belts
    Koyorad Radiator /w Expansion Tank
    HKS Oil Filter
    Greddy Radiator Cap

They all cost about $3500 and the Engine then cost $1800. SO altogether it cost me $5300 for the engine

I also decided to get some genuine Type-X rims banded so they are wider and have a nice lip too. They cost me around $300 for the 4 rims.
Lets say they look so much better sitting on those rolled fenders and much wider rear fenders.

That now brings me onto the body itself. I got a fender rolling kit for $30 of eBay and it worked a dream and all the fenders. It did give a real mean looking stance too! I also bought some black pinstripe tape and re-did the chassis tape and fender tape making it look more original.


They all cost me lots of money and it did make a huge difference but its for the better i think. This car looks so sexy now. Hope you all love it as much as i do!

yngsensei

jp
Posts: 336

Location: Japan Yokohama
Occupation: making dope beats
Age: 25
V$: idk
#32   2017-04-19 20:26          
The car looks beautiful my man. When I finish my S15 we have to take some pics!

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#33   2017-04-19 20:27          
Yes we do, hopefully that S15 looks amazing!

Soju

kr
Posts: 1247

Location: South Korea
Occupation: Smuggling Soju
Age: 122
V$: Broke
#34   2017-04-20 14:32          
I guess I have to get another Silvia some day, yours look so cool!

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#35   2017-04-20 14:40          
Im really digging the new paint job. Sets off the kit really well

THWOLF00

us
Posts: 260

Location: United States
Occupation: Northside Performance
Age: 23
V$: 83,281
#36   2017-04-20 18:50          
Lol You Have a 4A Swapped S13 as well!! That's cool! Keep up the work!

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#37   2017-04-20 18:57          
You too man! The 4A is just enough for downhill runs haha

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#38   2017-04-22 06:00          
thats an different engine choice

Zero

en
Posts: 1504
http://ebabe.com/urmumgettingdirt...
Location: England Da North
Occupation: Ford Technician
Age: 29
V$: 22,905
#39   2017-04-22 17:42          
Being is different has the word drift in it so its good LOL

dariws

ro
Posts: 168

Location: Romania
Occupation:
Age: 29
V$: 5.343
#40   2017-04-24 18:45          
Really interesting engine choice.I like it.
Are you planning to add a turbo?
This topic is locked, new posts are not allowed.