Author Message

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#1   2016-03-14 20:53          
hello guys i bought this s14 of of a sketchy ass dude i got it for V$4000 and it already has some stuff done to it:
Vstanced Drift control arms
Vstanced Coilovers
Ebay Brembo's





the car is very clean and there are brand new tires on there also it has 300.000Km on the motor and body so im planing on swaping a new engine in it prob. a 2jz or rb26/30

bad things about the car:
the engine makes a weired knocking sound
the exhaust leaks but ill prob. going to straight pipe it
the radio doesnt work
the passenger windows wont go up again when it all the way down

stay tuned for some epic things to the s14

Lagano

si
Posts: 1739

Location: Slovenia West side
Occupation: Taking it easy
Age: 24
V$: :$V
#2   2016-03-14 21:08          
Damn, that's cheap! You already got some upgrades, too. I suppose the engine and mileage knocked down the price, the car must be pretty worn out, but it still looks in good condition. Do you already have any plans for it?

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#3   2016-03-14 21:21          
No not really but I have to register it first and then ill have to look but im kinda going for a daily/stance so but i still need to do a full check on the car

SHAN3`

jm
Posts: 227

Location: Jamaica Spatec Racing's Garage
Occupation: Student Scientist
Age: 28
V$: $$$$$
#4   2016-03-15 05:16          
I should be able to find a complete 2JZ for you. Stop by my shop some time !

RinKK

ro
Posts: 147

Location: Romania
Occupation: Cruising in my Dacia
Age:
V$: 18500
#5   2016-03-15 06:16          
Nice car but dammit there are so many S chassis it's hard to make a unique car out of one because evetything has been done to them. My tip is that you should keep it as original as possible, but it's your car :D

JdmSly

us
Posts: 715

Location: United States Arizona
Occupation: Owning cars for less than 2 weeks
Age: 8
V$: 31192
#6   2016-03-15 06:18          
RinKK:
Nice car but dammit there are so many S chassis it's hard to make a unique car out of one because evetything has been done to them. My tip is that you should keep it as original as possible, but it's your car :D

Let people build what they want. No reason to shoot them down because they like the car :) Then again its their car not yours! <3 Stay Humble.

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#7   2016-03-15 09:41          
so i got some good deals on some parts:
326 power wing (v$200)


4 REAL ssr sp1 (v$600 each)

also i got the engine out and its was kinda hard to do bc the engine was welded on some plates insted of motor mounds but we got it out

i also inspected the car and there were lots of scratches in the rear
also i fixed the radio it wasn't conected

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#8   2017-03-30 19:39          
so it has been over a year and unfortunately my s14 got stolen about like 5 months ago it was still broken and had no engine but they stole the shell so im kinda screwed but i just looked at another S14 but this one is pretty striped but its in way better shape and its only 2000V$

also i bought a LS1 from a friend that was tired of having an ls in his drift car and he is going to do a 2UZ-FE swap so he sold it to me for 2000V$

he also included a dyno sheet but its just a stock LS1

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#9   2017-03-30 19:46          
Wow cant wait to see what is caming from this build

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#10   2017-03-30 20:13          
So i just collected the car and drove it around town to get to my friends house/little tiny shop and parked it there for now hes going to do a full check on the car but he already said to me that the engine ins't healthy and he will be doing a compression test on it but i'm pretty sure that it will fail and it will be a blown engine since it didn't have much power wile i was driving it to my friends place


Plans:
-LS swap
-Cage
-new exhaust
-suspention and coils
-weld the dif or LSD
-bucket seats
-wheels
-bash bar
-tube front end (maybe i'm not sure yet)
-no interior
-new head and taillighs
-repain the car (possibly red)
-straighten up the front end again

and possibly more

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#11   2017-03-30 21:00          
Thats lot of plans hope you can get they done.

Soju

kr
Posts: 1247

Location: South Korea
Occupation: Smuggling Soju
Age: 122
V$: Broke
#12   2017-03-31 02:14          
LS-swapped S14 looks promising :)

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#13   2017-03-31 09:24          
So i have been talking to a guy who wants to sell his B16 Ej2 civic, i want to have it and might K swap it and maybe make it a track car but it needs alot of work and i hope i can talk the guys price down he wants 1500v$ for it but im willing to pay only 800-1000v$ for it since i need the money for the S14 and for life so yea i hope i can work a deal out, sorry i dont have a picture of it but i will make one when im getting it

This post was edited by ownzz__ (2017-03-31 16:17, ago)

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#14   2017-03-31 16:32          
so i just riped the engine out and took of the bumper and light to see what the damage is to the front end but its not so bad.
the SR is healthy but the head gasket was blown so i replaced that it was 50v$ and also checked the gearbox and it was good so yea basically im selling that SR

(i know my shop needs better lights but i'm too lazy to replace them)
also i just bought that civic i talked about earlier and i got the dude down to 750V$ because the B16 was kinda dodgy and there was a cheap ebay exhaust on it and also it came with some cheap ass steelies




MyNameisJeff

jp
Posts: 102

Location: Japan Osaka
Occupation: Working on cars
Age: 25
V$: 3900
#15   2017-03-31 16:54          
Nice civic man! Did you hit vtec in it yet?

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#16   2017-03-31 17:05          
# MyNameisJeff : Nice civic man! Did you hit vtec in it yet?
yea man on my way home its pretty slow but it sounds cool

Added 17 minutes later:

so i was walking around with a friend when i all of the suddent saw a S14 dark red shell witch looked like the S14 that they stole so i took a look and turns out that was my S14 but it was striped so it needs a rebuild and most of the parts are missing







but this S14 is going to be put on hold because of the money.
i already have 2 money pits and i want to build them up first

This post was edited by ownzz__ (2017-03-31 17:25, ago)

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#17   2017-04-03 16:26          
so i have done some more stuff
test fitted the LS



Striped the interior

instaled the SR in the red shel



went to the junkyard to pick up 2 and picked up 2 doorcards (15V$ killer deal)

installed the interior in the red sr and reinstalled all the aero parts



i want to rebuild the red S14 and sell it because i have something in mind and its gonna take some money but it will be cool

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#18   2017-04-05 13:17          
so i have a lil update on the EJ2 i got some coilovers (scale innovative) got it for 1.5 V$



he also threw in a free mugen front lip (i this its fake ebay mugen because of the quality)
and i also found the two front grills that where missing in the front bumper, they where in the trunk



there is more to come with this car

MyNameisJeff

jp
Posts: 102

Location: Japan Osaka
Occupation: Working on cars
Age: 25
V$: 3900
#19   2017-04-05 18:28          
Nicee a civic! And really fast progress on the s13!

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#20   2017-04-06 17:54          
so ive traded the red S14 (without SR) for some parts since i just wasn't going to finish that thing any time soon and i needed some parts that i got now
so i got:
Vstanced drift knuckles
Vstaced drift coils and springs
LS-3 Longtube headers
2x Bride pull position
so yea its a killer deeal, also some progress on the Drift14 took it to Vstaced garage to get the LS1 engine mounts made and to get the suspention parts and the brides instaled







Added 1 hour 29 minutes later:

wll i dont know if i should've done this but i bought jet another car
its a Vw vento and its super clean, i got it for 300 bucks so idk if i should keep its a a daily or as another project or if i should sell it
Pics:





Added 30 minutes later:

the b16 is out and im bot sure what engine will go back into that hole B18, K20 or K24
also cleaned the enginebay to make it look good again


This post was edited by OwnzzGames (2017-04-06 19:54, ago)

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#21   2017-04-11 16:50          
well there i just spent 500V$ and traded the B16 for a K20A Type-R
just picked it up in the Vento and it looked pretty good so i cant wait to finally start doing big things to the EJ2






i also took out the back seat of the ej and got 20V$ for it



also sold the spoon exhaust tip for 80V$ since i didnt realy like it, planning on getting a dubble mufflerer with silencers

Soju

kr
Posts: 1247

Location: South Korea
Occupation: Smuggling Soju
Age: 122
V$: Broke
#22   2017-04-11 17:12          
nice progress on the Civic!

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#23   2017-04-11 17:19          
well the engine is in and up and running it took some cranks but its in the ej and working

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#24   2017-04-12 20:29          
so i got some more stuff done to the EJ
i traded front bumpers with a friend (i kept the lip) and i got a EK9 front bumper so i reinstalled my spoon lip on there and it looks way better



i also cut out the rear bumper to make it so the air behind the bumper can escape better and also for the look



so here i made the cut and it looks actually better than i anticipated

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#25   2017-04-13 16:31          
so i got the trunk smoothed out with bondo so it looks a bit cleaner also got a straightpipe with silencer from a friend who had it laying around so that was free for me and i also cleaned off the rear bar the black marking so it looks clean again

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#26   2017-04-16 18:41          
so i got alot of progress on the civic on the last few days

-got it registerd



-got 2 evo x recarros from a buddy for cheap 250V$ since he neede to get rid of them asap



- a NSX R wheel 250V$



- also test painted the rear bumper and trunk to see if i like the color and im going for it



- got some new wheels dont actualy know what they are 100V$ each and lowered the coils alot



Added 2 minutes later:

well it hapend i just sold the Vento for 900V$ so i actualy made some money on it and now im on the hunt for a daily again, might pick up a picku or van so i can transport car parts and engines so yea but ill keep on looking

holeecrab

id
Posts: 882

Location: Indonesia
Occupation: Delusional Artist
Age: 26
V$: vipka
#27   2017-04-16 22:42          
Lovin the clean rear trunk!

Soju

kr
Posts: 1247

Location: South Korea
Occupation: Smuggling Soju
Age: 122
V$: Broke
#28   2017-04-16 23:43          
I like the rear as well. So clean.

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#29   2017-04-17 00:08          
Same but i might change the exhaust but i dont know yet also going to start work on the driftcar again soon

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#30   2017-06-15 09:06          
So i haven't posted in a pretty long time but I'm back now and i got some good and bad news, the good news is that I finally got my own shop which I'm stoked about and the bad news is that the s14 is sold because i've started to notice that the rust is starting to come trough on the frame so I've sold the whole car with everything with it for 6K but don't work i will be buying a new drift car project snd that car will be so cool, it will be build as a full competition drift car but i will probably get another daily because right now I'm dailying the civic and i want to get another car that is easy to drive and not low anyway i got some pics pf the new shop



Its a pretty shop just for one person



Nice large workbench



It even comes with with a lift







Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#31   2017-06-15 19:59          
this shop is mint dude

low_rider

00
Posts: 3

Location: --- go away stalker
Occupation:
Age:
V$: uhh
#32   2017-06-16 01:46          
hella nice garage

Soju

kr
Posts: 1247

Location: South Korea
Occupation: Smuggling Soju
Age: 122
V$: Broke
#33   2017-06-16 09:17          
that's a nice garage

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#34   2017-06-16 21:16          
so ive got myself another lil and hopefully we can finish this one quickly so i have a working hourse
so its a 1993 Chevrolet sonoma S10 and it needs alot of work its basicly just the shell and supsention
but i got it for a steal tho it was only 100V$ since it was taking up his space and he needed the space badly





engine wise we will prob go with a slightly modified LQ9 and for the body just make it so i can haul stuff like body kits and engines

Bad.Compqny

hr
Posts: 556

Location: Croatia Vukovar
Occupation: Pretending not to be Bad.Compqny (c) BB93 / ANARCHY
Age: 27
V$: $$$$$$$
#35   2017-06-16 21:44          
Sick roleplay bruh. Really thought thru

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#36   2017-06-17 07:33          
so i already did a junkyard run and I've gathered this for 200V$



list:
-stock Headlight left and right
-stock driver seat
-dash upper part
-dash center console

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#37   2017-06-20 19:12          
so im back and i got some more progress on the truck,
i visited my buddy's shop and he also luckily had some parts laying around in his (junk)yard so i got all of those new parts for 500V$ and a tray of beers:
- doors left and right
- big tow mirrors, why? because why not
- long bed and bumper
- tailgate
- fenders
- GMC grill
- front bumper
and i also got a bone stock LQ9 for 1.5KV$







bropping the LS in and making mounts





and got it all back together and it fits perfectly just like its supposed to be there but its not wired up yet just because we still need to paint it

Sleepin mOnkey

jp
Posts: 2459

Location: Japan Universe, Milky way ,Solar system, Earth
Occupation: Automotive engineer Student
Age: 32
V$: 14.750
#38   2017-06-20 20:18          
Nice work on this sonoma dude,are you going to drift her?

OwnzzGames

nl
Posts: 343
http://https://www.facebook.com/o...
Location: Netherlands
Occupation: just trying to learn 3D stuff
Age: 24
V$: -1
#39   2017-06-22 21:20          
# Sleepin mOnkey : Nice work on this sonoma dude,are you going to drift her?
yea ill prob just drift her once or twice

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

some more progress on the S10

we got her primed and body worked



we also got her all painted and it looks soo good



we put her all back together and it look superb



doge

si
Posts: 3764
http://instagram.com/djuk.i.c/
Location: Slovenia
Occupation: professional parking lot hoonigan
Age: 25
V$: 웃
#40   2017-06-23 09:06          
nice paint, looks like mustard :troll:
This topic is locked, new posts are not allowed.