Virtual Stance Works - Forums - indestructible engine

Author	Message
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#1 2014-09-21 16:01
	hi, want to make my 2jz almost a indestructible engine, how do i do that what file do i need to edit

stonedmonster Members Posts: 466 Location: Australia Occupation: Age: V$:	#2 2014-09-21 16:08
	alright first of all what is the folder name for the engine or which mod is it

Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#3 2014-09-21 16:11
	its the one oxman99 made i just need to know what file, the mode doesnt matter

stonedmonster Members Posts: 466 Location: Australia Occupation: Age: V$:	#4 2014-09-21 16:32
	yeah it does because if it doesn't have the source you can not do anything to make it indestructable also do you have a link as i don't have that one

Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#5 2014-09-21 16:37
	i have the javas for it.

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#6 2014-09-21 16:40
	Under the Javas. edit the piston max RPMs, do the same for the connecting rods, pistons and block as well. I. Did this with BB93s LS3 and get out to 8750RPMs. Let me know if you need any further help! Also where the heck did you find source for the 2JZ?! You can more in depth edit the connecting rod length, bore of the pistons/block and the crank specs to get some power out of it and effectively strengthen the engine. My 1.5JZ hybrid goes to 9750limiter and can take 10k but I like to place limiter to ensure safety. I highly recommend copying real spec parts as just putting in random values can really upset the compression ratio and the engine will not start. CP, BC, and Tomei make great parts in real life and they're specs are very fun in SLRR. This post was edited by Mister_Softee (2014-09-21 17:03, ago)
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#7 2014-09-21 17:03
	i just want it not to break with boost so i can make it like the ones on YT with like 4.5 bar boost

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#8 2014-09-21 17:08
	# Runaeh : i just want it not to break with boost so i can make it like the ones on YT with like 4.5 bar boost damn! 4.5bars hahaha I only run 1.58 (23psi)for street spec through T88 turbo. Write up some specs and if you would want to share those Javas I will gladly help you rescript to awesome spec My thoughts we give you some 282/282 cams with 12.5mm lift 142mm Tomei connecting rods 10:0:1 compression (will calculate the crank center to top and cylinder length) I recommend 1.58-2 bars but I can tune turbo to any spec and WASTEGATE as well.
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#9 2014-09-21 17:10
	its oxman99s javas so not gonna share them, i got them to make some sound mod for it :)it already has real specs it just doesnt hold the boost for long before its broken.. Added 2 minutes later: the engine btw is on gom-team

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#10 2014-09-21 17:15
	Ahh you acquired the Javas from OxMan himself, understandable! I know the 2JZGTE engine is on GOM but sourceless, I have modded 1JZ source with Shift2 sounds. Anyways sent you PM but I will post here as well. Maybe boost is too high? Very high performance single turbo set ups run 3.1-3.44 bar.
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#11 2014-09-21 17:17
	even if i have it at 0.5 it breaks, it just break later later than 2.0bar

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#12 2014-09-21 17:20
	That's odd I haven't ever encountered a problem like that. Not running an ebay manifold? lol you raised the RPMs I assume???
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#13 2014-09-21 17:28
	nope but i think it has something to do with T_loss in cylinder heads maybe

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#14 2014-09-21 17:30
	On my Java checking. whats you T_Loss spec??? Mine is set at 80 (yet to have messed with it)
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#15 2014-09-21 17:39
	its at 90 Added 20 minutes later: T_loss is at 90 idk what it does but ill change it in a sec Added 13 minutes later: it helped alittle but it still gets broken fast:/ This post was edited by Runaeh (2014-09-21 18:13, ago)

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#16 2014-09-21 18:22
	Hmmmm sorry for the slow reply busy texture editing I'll shoot you some more JZ specs for the head, there's a value. Below T_Loss as well haven't ever tweaked this as stated running stock 1JZ script for those.
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#17 2014-09-21 18:25
	its my engine block now that breaks now,rest is fine Added 9 minutes later: its set to 10k rpm max Added 27 minutes later: what is your vmin set to ? Added 1 hour 3 minutes later: mine is 91.26 This post was edited by Runaeh (2014-09-21 20:07, ago)

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#18 2014-09-22 08:01
	sorry for the slow reply, got busy with some projects and life lol intake_valve_diam = 34.6; number_of_intake_valves_per_cylinder = 2.0; exhaust_valve_diam = 30.0; number_of_exhaust_valves_per_cylinder = 2.0; cc_dome_safe_clearance = 18.7; maxRPM = 20000.0; inertia = kgToInertia(60.22); T_loss = 80.0; Vmin = 86.8; // in cc // my set up with oversized +1mm intake and exhaust valves here is my turbo set up, again i'm only on 1.58bar but maybe try playing with the turbo script??? P_turbo_max = 1.58; default_P_turbo_waste = 1.9; P_turbo_waste = default_P_turbo_waste; max_waste = 3.5; min_waste = 0.5; block set up helps make this tough as bore = 87.000; crankshaft_slot_ID = 33; crankshaft_bearing_slot_ID = 41; cylinder_head_slot_ID = 19; transmission_slot_ID = 35; oil_pan_slot_ID = 31; cylinder_length_from_top = 133.80; crank_center_to_cylinder_top = 249.97; rpm_idle = 950.0; time_spark_min = sparkAngleTo4cycleTime(350.5); time_spark_inc = sparkAngleTo4cycleTime(360.5)-time_spark_min; time_spark_RPM0 = 2600; time_spark_RPM1 = 3600; RPM_limit = 10000; cylinders = 6; connecting rods length = 142.00; maxRPM = 12000.0; inertia = kgToInertia(60.500); crankshaft stroke = 94.00; main_bearing_diam = 0.0; con_bearing_diam = 0.0; maxRPM = 10000.0; inertia = kgToInertia(12.300); pistons bore = 87.10; length_from_wrist_pin_center_to_crown_base = 50.00; crown_height = 20.00; crown_volume = 86.5; length_from_lowest_safe_belt_to_crown_base = 40.00; maxRPM = 10000.0; inertia = kgToInertia(6*0.390); this should be an easy 10-11k set up and safely go into boost at 2400-7800RPMs. hope this helps.
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#19 2014-09-22 09:26
	its my downpipe and intercooler now, have fixed everything else Added 13 minutes later: could be nice to make something like this *LINK* This post was edited by Runaeh (2014-09-22 09:40, ago)

Gaveup Members Posts: 22 Location: Canada Annapolis Valley, NS Occupation: Gaveup Age: V$:	#20 2014-09-22 11:06
	setMaxWear(kmToMaxWear(311000.0)); <- make that number bigger and it makes the part last longer.

Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#21 2014-09-22 11:13
	i know but it still breaks Added 6 hours 39 minutes later: there isnt like a limit for it so you can make so it never breaks? This post was edited by Runaeh (2014-09-22 17:53, ago)

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#22 2014-09-22 18:09
	# Runaeh : i know but it still breaks Added 6 hours 39 minutes later: there isnt like a limit for it so you can make so it never breaks? its called my 1.5JZ try upping max wear on.... connecting rods pistons turbo maybe edit efficiency on intake manifold? I run 3.40
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#23 2014-09-22 18:13
	i have wear at 999999km so ill try that btw look at your inbox Added 1 minute later: my efficiency 0.95; what does it do? Added 13 minutes later: i dont wanna gain more horsepower than it has, it should just sit at around 1000hp-1090hp no nos no race gas etc This post was edited by Runaeh (2014-09-22 18:28, ago)

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#24 2014-09-22 18:56
	# Runaeh : i have wear at 999999km so ill try that btw look at your inbox Added 1 minute later: my efficiency 0.95; what does it do? Added 13 minutes later: i dont wanna gain more horsepower than it has, it should just sit at around 1000hp-1090hp no nos no race gas etc it helps air flow, it's not a supremely noticeable mod but I believe it helped with throttle response, I'm using an xbox 360 controller and well it just felt right ^__^
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Gaveup Members Posts: 22 Location: Canada Annapolis Valley, NS Occupation: Gaveup Age: V$:	#25 2014-09-22 23:03
	Increasing efficiency on head ports/intake manifold/exhaust manifold will increase the performance on these parts you can go above 1.0, it's why the carb intakes and carbs work better from the blackseries parts compared to the base intake manifolds and fuel rails, fuel rails also have their own settings for fuel consumption and such that I haven't started messing with but adding fuel to the consumption parts and having high intake efficiency lets you run some massive boost.

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#26 2014-09-23 03:25
	# Gaveup : Increasing efficiency on head ports/intake manifold/exhaust manifold will increase the performance on these parts you can go above 1.0, it's why the carb intakes and carbs work better from the blackseries parts compared to the base intake manifolds and fuel rails, fuel rails also have their own settings for fuel consumption and such that I haven't started messing with but adding fuel to the consumption parts and having high intake efficiency lets you run some massive boost. some stock parts are rated at 0.67 efficiency! Insane-o poor by tweaking my JZ to have 1JZ head with 2JZ block and my custom connecting rods, pistons, 87.1mm bore and 94mm stroke mod I went from a poor 6800rpm max redline to a 10,000RPM peaking out 23lbs (1.58bar) turbo pressure with 18lb wastegate, I constantly tap boost at 8800RPMs hitting rev limiter and never have any heat or wear problems, also running reverse stagger TRD N2 spec cams 304/10.8mm lift intake with 320/11.0mm lift nasty mid end and lower response all the way to high end. This is on my 1.5JZ S13. I also want to find out what is the formula for the fuel consumption so I.E. Stock maybe is equivalent to 160lph and could mod to a spec of walboro 244lph, some guys in real life run twin walboros so theoretically if you wanted to replicate that you can double or triple the fuel consumption value.
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#27 2014-09-23 10:37
	danm you have done some stuff lol, btw is there any good 1jz released, the vip one is to high poly i dont like it Added 31 minutes later: unload: Undefined GameType Destructor! 00A800C1 (Rf) i get this error now when i am trying to go to valo This post was edited by Runaeh (2014-09-23 11:08, ago)

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#28 2014-09-23 18:02
	I believe the VIP 1J is the one I tweaked, I might upload it if the Jeezus gives me permission I don't believe it is too high poly but I play on my home entertainment centre. XD in regard to the Valo problem, I am not sure. I NEVER drive Valo due to the fact it takes 2-3 minutes to load and it is laggy Gonna post my controller settings soon, just got out of Academy.
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#29 2014-09-23 18:07
	valo is OP, just do the loading order then its perfect:), i did release all vip mods but got banned for it ;D did it without permission i learned from it Added 3 minutes later: do you btw know how to set steering sensitivity to a custom value since i want it lower than you can ingame, and is there like traction control/ assist in the game?

JUDAS_MENTOR Members Posts: 180 Location: Australia QLD Occupation: ☆☆☆CENNIE LINK STAR☆☆☆ Age: 122 V$: 13760	#30 2014-09-23 18:12
	Meh I figured that's why I don't do it that and I don't for the respect of the authors of the cars/parts, it's just nice to have them as being a big car enthusiast it makes the game more enjoyable! Lol I know the valo trick but mehhhhhhh much wait, so lag. Lololol
	Ｃ－ＷＥＳＴＩＮ＇ ☆A U T O☆S A L O O N☆ M A G I C K E☆ ☆1989 Silvia Q's Diamond Selection☆
Runaeh Members Posts: 130 Location: Denmark Occupation: building cars,motorcycles,scooters ect Age: 28 V$:	#31 2014-09-24 07:59
	do you btw know how to set steering sensitivity to a custom value since i want it lower than you can ingame?

Forums / Street Legal Racing Redline / Help / indestructible engine