Author Message

holeecrab

id
Posts: 882

Location: Indonesia
Occupation: Delusional Artist
Age: 26
V$: vipka
#761   2014-12-10 12:40          
@Robustock : thanks ^^ Here's the continuation btw

at the next day, i bring the wreckage into Yamada-san's backyard garage (which is quite large, tbh). his garage notoriously known as the best tuning garage around Hiroshima. We ordered Blitz to tune and develop the engine, they happily agreed, but they said the engine shipment will takes a bit long time due to the shipping issues. Here's the photo when we first bring the chassis into the bay.


I repaired the body, while Yamada-san works at suspension setting and brake stuffs. We're currently using Tein shocks and brembo Brakes.
Oh, and he told me to paint the car to white, dunno why, but it quite looks good.


Then we put the wheels into the car, it's a replica CE28N, it looks very similar, but it looks like going to broke anytime, it's a placeholder anyway :P .
and due to the suspension setups , we installed a 50mm widebody fender, because drift car.


The next day, the engine finally came. It's a fresh RB26DETT, it produces about 620HP as the mail that comes with the engine says. Abit huge for us, but we'll try to master it, no matter what. It's free, anyway :P



At the afternoon,we're trying to tame the monster around Bihoku, but we're fail to control it, as the rear end is unstable as hell and the wheels makes a huge crack. Damn bootlegs!!


then we spend the night with try to eat a strange food with a tortilla wrapping in it, dunno what it called since we knew nothing about it, but it makes Yamada-san
getting a diarrhea, for some reasons. Get well soon, dude.

Since Yamada-san was sick, now i'm doing this alone. i put some wings and rear diffuser, and new rims, since the old rims are broken in half, now it's a LEGIT CE28N. I'm not going to buy or use bootleg rims anymore, meh.


then i put some sponsors stickers due to sponsors agreement, and as quickly as possible i try to put it on the track to test it. Here's the car before the action :


I haven't test it properly, but i hope it gonna ends well.

(sorry for the long post btw, i really enjoyed writing this :P )

This post was edited by holeecrab (2014-12-10 16:39, ago)

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#762   2014-12-10 14:24          
So finally after almost 2 months of gathering, fitting and swearing I have got a complete 426 HEMI.
This is what I have started with:

And this is how it looks now:

It has 407 hp and runs on 95 octane pump gas. Good enough for the beginning, I guess. Maybe I will get an intake with 2 4bbl carbs but first I'll do a suspension upgrade.

Diesel life

2jzCookie

se
Posts: 252

Location: Sweden
Occupation: Doin hoodrat stuffs
Age: 26
V$: 7376V$
#763   2014-12-10 15:36          
Hey guys!
I've been following this forum for quite some time now but never really posted anything. Mostly due to the fact that
I'm a complete noob with photo editing and pc stuff in general. But after looking up some things I'm finally ready for my post!
Btw if I do any mistakes or you have some good criticism for me I'd appreciate it you told me. That way I'll make sure it doesn't happen again!



So I picked up this beater. It's a 1986 Ford Sierra with over 350k miles on it. As you quite clearly can see it has some rust on it and a hanging bumper. After all it's not a new car and on top of that the guy that I bought it from used it as his daily for many years. He said i'd could have it for 200 bucks so I went for it not knowing what a pain it would be...



After I got it to the shop and did a further inspection on the car I discoved that the block had a big crack in it, making the engine pretty much worthless to me. I could repair it or buy a new block but since I'm on a tight budget that isn't an option for me.



While bummed out about the news about the engine I went ahead and started inspecting the suspension and undercarriage. I found out that the suspension components were busted and needed replacing also that there were large amounts of rust in the undercarriage making the car even more worthless than it already was. At that point I realized my plan of repairing the car and selling it wouldn't go hand and hand with my budget. So now i'm sitting here with my Shitierra not knowing what to do with it. I could scrap it but it didn't feel right to do so just yet.


Hope you enjoyed this. I will back with more once I figure out how you liked it :) Thanks for reading!

pramadhana14

id
Posts: 7

Location: Indonesia Jakarta-Bekasi, they're close
Occupation: Just a normal broke student
Age: 26
V$:
#764   2014-12-10 16:31          
Finally! I've got the wheels that will perfectly match the Evo, here's a picture of it already installed in the car

and yes, that is the TE37, in black, and it suits the car really well

oh yeah, while I'm waiting the wheels arrived 4 days ago, I also sourced a lot of goodies such as carbon fiber doors, bonnet, and trunk, custom bumpers and side skirs, Evo 5 wing, front and rear RalliArt black strut bar, and a custom exhaust system with a Kakimoto muffler, luckily the parts arrived just 5 minutes after the wheels arrived, how awesome is that!, so I installed nearly all of them into the car, and here's some of the picture after I installed them


btw, here's how the car sits now, I lowered it 1" allround after installing the bits


and after that, it goes to the paint shop (yes, the CF parts will be painted as well) for 5 days

==5 days later==

Finally! the car is back from the paint shop, the painter sure did a very good job painting the parts, especially the CF bits that need more attention to paint, here's some picture of the car



and here's the picture of the strut bars that I installed after the car back from the paint shop



there'll be more to come after this, and it will involve some Horsepower (and Torque, of course!:))

Kornis

ie
Posts: 763

Location: Ireland
Occupation: ¯\_(ツ)_/¯
Age: 28
V$: 3fiddy
#765   2014-12-10 18:10          
Got new wheels for the E34... also got a lip for the front bumper, roof spoiler and a small trunk spoiler added during the last week or so. Wheels that i bought are Borbet As 16''. They also came with slightly used tires. Got the new H&R coils set installed over the last few days, but didn't play around with the setup yet as I'm content with how the car sits at the moment. After the winter I'll be buying some proper wheels in 17 or 18'' and then I'll be playing around with the car's height setup.



Robustock

zr
Posts: 1369

Location: Zaire
Occupation: Wasting time
Age: 27
V$: 50
#766   2014-12-10 19:34          
I like the Evo, R32 and the E34!

Here we are, the Mazda has been painted, looks excatly the color I was looking for and I have wingless it. I got some replica of the original sideskirts they are in black because I didnt painted them since I get after few days, but they looks really good, can't wait for the meeting of the next week!

Gonna clean the rear window and replace the license plate!




This post was edited by Robustock (2014-12-10 19:56, ago)

BushyAlmighty

us
Posts: 43

Location: United States
Occupation:
Age:
V$:
#767   2014-12-10 23:01          
-1 month later-
Got the AE86 back after about two weeks. Since then I have done some upgrades to it.
Those were taken right after getting my car back.


Also did some upgrades to the engine, installing the TRD spark wires, changing all the belts to HKS belts, new HKS oil filter, and a supercharger(even found a 4A-GZE cylinder head cover).

The car is now pushing 200hp. This is the end of upgrades for a while as I have to daily it since I sold my Miata.

gt3076r

00
Posts: 1133

Location: --- Midnight City
Occupation: REKT
Age: 12
V$:
#768   2014-12-11 00:22          
Just making a post about my S13 to let you guys know it hasn't died haha. I got a new gas tank, installed an S14 Brake booster and brake lines that run to my new Wilwood caliper and slotted rotor kit. My TE37s were repainted in another shade of flat black so they're missing the logos for now. These purple RAYS studs don't really fit the car so I might sell them off soon. Sadly enough,I went against my word about modding the engine any further by buying a used T04Z off of a friend's RB26 build. According to my tuner, my engine is built to run around 15psi (safely) on the T04Z so I'm bolting it on and re-mapping the ECU next week. Hopefully I'm going to be somewhere around 500whp.

Here's a shot of my new brake setup and the turbo that's going in. :D
STANCE ARMY
u avin a giggle m8 il bash ye hed in i swer on me mum

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#769   2014-12-11 00:27          
Nice shot, and good buy on that turbo! Pics of the black top coming soon, I JUST recovered from my scare of losing my slrr

Added 9 minutes later:

And, when I started my comp back up, it decided it had to do the windows startup repair, so I did it, and it somehow reset all my cfg files for slrr, so I have to go back through, and fix them. Using the slrr editor, and redownloading some mods... ugh...

This post was edited by dxg1997 (2014-12-11 00:36, ago)

gt3076r

00
Posts: 1133

Location: --- Midnight City
Occupation: REKT
Age: 12
V$:
#770   2014-12-11 00:40          
Thanks man! Yup 75% of the time SLRR is burning and fiery hell but it's worth the 25% of fun.
STANCE ARMY
u avin a giggle m8 il bash ye hed in i swer on me mum

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#771   2014-12-11 02:36          
Heres the Ae86. Black top head adds ALOT of power with those extra 4 valves. Power is up from 305 to 452, right in the range I wanted, and its not turbo, its supercharged, so no sudden boost of speed :D I decided to pick up some tow hooks, and said, why stop there? and got a Bride seat, with Takata 5-point, rollcage, hydraulic handbrake, steering wheel from an X30 Cressida, some HKS guages, strut braces, and some racing pedals. I got most of the parts are used (seat, gauges, pedals) and had to fab the cage myself. The welds on it are shit xD but they'll hold, because I welded the shit out of them. Installed larger exhaust so there's less back pressure to rob power. Picked up an endless brake kit, and some Weds Sport Tc005's 18" wrapped in used Toyo Proxes. (Little pissed off because the shock goes through the front brakes... AGH) Need to pick up some 40 mm spacers for the rear wheels. Gonna get her checked out, and take her to Ebisu. If you guys have any stickers you want me to put onto it, just post them here and I'll put them onto the car! :D









Added 9 minutes later:

Decided when I get there gonna strap a bunch of Go-Pros onto it. Fred has like, 4, and he said I could borrow them. THIS IS GONNA BE AWESOME. From what I've heard its an amazing track to drift on (does anyone have the full track? I only have Minami...)

This post was edited by dxg1997 (2014-12-11 02:46, ago)

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#772   2014-12-11 11:56          
Hey, may I come with you too?

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#773   2014-12-11 12:50          
Sure man!

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#774   2014-12-11 13:23          
OK, just tell me where should we meet.

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#775   2014-12-11 14:33          
Shit, were just down the road from each other, just come on over, and I'll start getting the trip set up. Need to know what vehicles you want to take, how long you want to stay (I'm going for about 2 weeks)

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#776   2014-12-11 15:03          
It took me 2 weeks to fit the new suspension. It stated it is good for drag racing. I'll put it on a test soon :D

I also took off the SHAKER hood and got a modified hood with a scoop so the air filter isn't naked anymore.

I found a 1971 cuda body on Valolist and will talk to the guy tomorrow. He only wants 800 bucks for it. I hope I can grab it!

Diesel life

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#777   2014-12-11 15:04          
# dxg1997 : Shit, were just down the road from each other, just come on over, and I'll start getting the trip set up. Need to know what vehicles you want to take, how long you want to stay (I'm going for about 2 weeks)
I'll take the Escort and the Carlton with me. And I'll stay for 2 weeks too, I have a house over there, and you're most welcome to stay with me!

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#778   2014-12-11 15:43          
Cool! That'll save money on hotels... How big is your garage? I'm taking the Duramax, AE86 and either Cuda or Civic... Which do you think?

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#779   2014-12-11 15:49          
Well, I'd say the Civic, but choose whichever you want, the garage is quite large, it will fit your cars. Also, change of plans, I'll get the Carlton only. Decided it's better to keep the Escort here.

David_2709

de
Posts: 1987

Location: Germany
Occupation:
Age:
V$: 2750
#780   2014-12-11 18:35          
I got some changes to my CRX! I sold the EJ20 and got a N/A K24 Honda I4 Engine! Plus I got Brick headlights, a factory new back bumper and some Tokio D Spec 7.00" Springs. The Winter came and I got some black steelies. My summer rims that I bought are SSR Professor SP1. On my way home from a trip I found some nice aftermarket double exhaust mufflers, they look almost like stock ones.



Here are the summer rims

The tires are okay-ish condition, so I might get new ones.

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#781   2014-12-11 22:08          
# David_2709 : Here are the summer rims

The tires are okay-ish condition, so I might get new ones.

You MAY, just MAY be missing brake calipers... Good luck stopping! xD

Ey papa

ca
Posts: 1613

Location: Canada Tokyo
Occupation: Driving my Wicked Focus
Age: 29
V$: 50467
#782   2014-12-11 22:28          
Lol
I like Kentucky Fried Chicken.
And I'm White.

Kornis

ie
Posts: 763

Location: Ireland
Occupation: ¯\_(ツ)_/¯
Age: 28
V$: 3fiddy
#783   2014-12-11 22:31          
# dxg1997 : You MAY, just MAY be missing brake calipers... Good luck stopping! xD
Real men don't need brakes

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#784   2014-12-11 22:43          
They just drag their feet? xD

*LINK*

Runaeh

dk
Posts: 130

Location: Denmark
Occupation: building cars,motorcycles,scooters ect
Age: 28
V$:
#785   2014-12-11 22:54          
you just turn, thats why you have a steering wheel.

ajlennox

ca
Posts: 573
http://Verywebsite.com
Location: Canada Halifax, NS
Occupation: ( ͡° ͜ʖ ͡°)
Age: 26
V$:
#786   2014-12-11 22:57          
Brakes are for people who WANT to stop.
Form is the Function

JdmSly

us
Posts: 715

Location: United States Arizona
Occupation: Owning cars for less than 2 weeks
Age: 8
V$: 31192
#787   2014-12-11 23:04          
well i bought a REKT 240 it was pretty nasty looking but 300$ wasnt bad :D
plus a ruined 2j :D






I stripped the plain and interior on straightened most of the body out but there was still some structural damage done.
i also replaced the damaged suspension :D with some tokico full suspension kit set at 7" at all wheels.


2 Days later:
Finished the body work and added some little things like ecu and wiring and more tiny things.





2 hours later:
Got some 18 inch forgiato Rims for now off my old bmw with nice tread.

Hours later:
fitted the 2j but cant find my intercooler any one have an extra laying around for the twin turbo pipe set up?
2008 Honda S2000 -Grand Prix White-
1996 Nissan Cedric -AJ4 Red-
2004 BMW E46 M3 -Dakar Yellow-

RP Here

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#788   2014-12-11 23:34          
So, on the boat, heading to Japan... This is so cool. I decided to bring the Civic with me, because LS2... xD but, yeah, we're on the way there, and gonna see how the Levin performs

{4 days later}

Wow, so we made it with minor sea sickness... Anyways, got the cars unloaded, and the Carlton is untouched, Duramax is okay, Civic is okay too, but the AE86 didn't escape unharmed. We hit a storm halfway through the Pacific, and apparently one of the straps holding the car snapped. Well, she skidded over, and slammed into a joist running up the side of the boat. Damaged the front bumper and part of the front carriage. Luckily the engine is okay, and the car didn't hit anything else... She left some skid marks on the floor of the bay though, so she left her mark... Anyways, got to the garage, and pulled the bumper off to inspect the damage. The carriage needs some welding, but the bumper seems unsaveable. It's toast. Well, better airflow to the intercooler, radiator, and oil cooler I guess...



{over the course of 2 days}

So, I slowly repaired the carriage, and here's the progress.

Here's what I had to work with after I removed the engine



And I hammered and reinforced the frame with some steel plate I found in your shop Facepalm... I'll pay you back for it xD



And I repainted the section (idk whats up with the strut brace)



And reinstalled the engine. It looks almost new! minus the front bumper... I might just cut the damaged bit off and put the okay part back on xD



I also got an offer for 30k on the Civic, and am seriously considering it because I spotted something that piqued my interest while driving by it earlier to get my USD converted to Yen...



Just a rolling chassis, but I stopped and talked to him (Thanks Droid Turbo for translating!) and he wants 800 usd for it, or 95,131 yen. Yes please!

This post was edited by dxg1997 (2014-12-12 01:23, ago)

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#789   2014-12-12 10:19          
oh please, you don't owe me anything. Use whatever you want for free! And yeah, she left her mark on the boat. Thankfully my Carlton is intact, and we are fine too! Also, I'm going to find a new project too.

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#790   2014-12-12 15:39          
That storm was pretty rough... I'm surprised that only the AE86 got damaged... What do you guys think about the Datsun? Should I sell the Civic, and put the money into the Datsun?

2jzCookie

se
Posts: 252

Location: Sweden
Occupation: Doin hoodrat stuffs
Age: 26
V$: 7376V$
#791   2014-12-12 16:11          
I decided to scrap the Sierra. It had way too much rust to get a profit out of it once repaired. So I started on my other project instead!



I bought this 240sx from a guy at Ebisu circuit a couple months ago. I was there for Ebisu Matsuri and on my way in I saw this. I decided to go over there and talk to the owner. He said he had it for a while and if I'm interested I could buy it. Long story short, it's mine now.



It has a completely stock 2JZ-GE that runs like a clock. I will most likely upgrade it, probably a turbo, cams and who knows what. I want it to be sort of a showcar but not to the point that I'm afraid to drive it xD. I'd also like to make a driftcar out of her!



I decided to get to the suspension first. I didn't like how high it was so I went with some adjustlable control arms, KW racing 4,5 springs and left the stock shocks in it. Also threw on some 18 inch Volk VSKF. They will fit it nicely once more is done to it!

My plans for it is a bodykit. And ofc some more horsepower, it barely pushes 250 hp right now so i'd like atleast 100-200 hp more!

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#792   2014-12-12 16:51          
Bad news on the cuda: the body was so rotten, it broke in half when the guy with the tow truck picked it up. The only thing that I could salvage was a 440 magnum. I also traded the 340 from the 70 cuda for a 1969 Dodge Charger R/T. Or what's left of it:


3 days later: The engine is in and fits pretty good:

Diesel life

BushyAlmighty

us
Posts: 43

Location: United States
Occupation:
Age:
V$:
#793   2014-12-12 16:56          
Finally found myself a daily. It's a CRX with lowered coilovers, and a stock B16 engine.



Now I can get back to work upgrading the AE86!

2jzCookie

se
Posts: 252

Location: Sweden
Occupation: Doin hoodrat stuffs
Age: 26
V$: 7376V$
#794   2014-12-12 17:52          
# BushyAlmighty : Finally found myself a daily. It's a CRX with lowered coilovers, and a stock B16 engine.



Now I can get back to work upgrading the AE86!
Nice Rexy. have any plans for it?

BushyAlmighty

us
Posts: 43

Location: United States
Occupation:
Age:
V$:
#795   2014-12-12 17:57          
New rims, turbo, new paint. Nothing crazy or anything.

Ey papa

ca
Posts: 1613

Location: Canada Tokyo
Occupation: Driving my Wicked Focus
Age: 29
V$: 50467
#796   2014-12-12 21:33          
Hi Guys I am Back,
So I went on vacation To Yokohama, in Japan and it was Boring.
But I found a Nissan S15 Silvia Frame For sale.
I bought it for 50$

Look at the Rust, That is Why it Cost me 50$
I like Kentucky Fried Chicken.
And I'm White.

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#797   2014-12-12 22:47          
GODDAMNIT SLRR!!!! ALL MY PLAYERCARS ARE GONE. ALL MY CARS ARE TOTALLY MISSING AND I'M PISSED AS FUCK BECAUSE I HAVE TO REBUILD THEM ALL

BushyAlmighty

us
Posts: 43

Location: United States
Occupation:
Age:
V$:
#798   2014-12-12 23:08          
-1 month later-
Got the turbo and new transmission installed. Also found some old Porsche rims and fitted them on.

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#799   2014-12-13 00:56          
So, at the track, I traded some parts around, and got some crystal black led taillights, a front bumper (had to hold it on with zipties) and a second seat, and decided to do ride alongs for $30 each, or 3563 yen. Someone gave me $179,000 for the Cuda, and someone else got the Civic for $30,000... I've never had so much money at once in my life!!! Anyways, I went back and bought the Datsun, and now just waiting on it to be delivered to Valo City...









Tried my hand at editing...

Before



After



Added 20 minutes later:

I called ahead to Fred and told him that when the car arrives, to paint it dark green, and order an RB26DETT and a full Time Attack bodykit. I want build on the suspension the guy put onto it, it's actually pretty decent, but I might get bigger rims, and better brakes, but for now, the Work Meshes and tiny brakes will do just for testing. Anyone have any 18" rims I might be able to buy?

This post was edited by dxg1997 (2014-12-13 01:03, ago)

ajlennox

ca
Posts: 573
http://Verywebsite.com
Location: Canada Halifax, NS
Occupation: ( ͡° ͜ʖ ͡°)
Age: 26
V$:
#800   2014-12-13 01:05          
# dxg1997 : After



Too much vignette and motion blur on the car, but not enough motion blur on the background. Just my humble opiniom :P
Form is the Function
This topic is locked, new posts are not allowed.